Quote:

I can say for fact that the higher the RPM I leave
at the quicker the 60'... I have a 5600 stall and I
leave at 5600... no chip... that gives me a 1.19 60'
I would like to go to a 6000 conv and start upping
the revs to see if that gives me a better 60'....
its all what your chassis can take... why have your
torque at 5000+ rpm and leave at 3000......JMO
I know alot of guys that the chassis cant do it but
they also dont like doing chassis work and just leave
it alone





I'm the same as Mr.P ...well atleast after I put the anti-roll in. Up until the new BGR mill I always left on the wood with a 5800 stall...


5.53 @ 125 1/8th on the launch control..more left in her!