Small Block Stroker Carb Size

Print Thread

Re: Small Block Stroker Carb Size [Re: justinp61] #1362206 01/02/13 11:03 PM 01/02/13 11:03 PM
Joined: Jan 2003 Posts: 5,486 SoCal Brian Hafliger master
Brian Hafliger master Joined: Jan 2003 Posts: 5,486 SoCal	Quote: My 408 is very close to yours, same compression and heads. I have just a little more duration and more lift with a Victor. Mine loves the Bigs 950HP on it. I'd like to try a 1000 4150 to see if it would pick up. On the dyno I've seen an additional 5-8 HP over the 950 but haven't tried it at the track. Brian Hafliger

Entire Thread
Subject	Posted By	Posted
Small Block Stroker Carb Size	dusterjp	12/31/12 04:08 PM
Re: Small Block Stroker Carb Size	dwayne welder	12/31/12 04:27 PM
Re: Small Block Stroker Carb Size	1967dartgt	12/31/12 05:13 PM
Re: Small Block Stroker Carb Size	MR_P_BODY	12/31/12 05:19 PM
Re: Small Block Stroker Carb Size	rapom	12/31/12 09:51 PM
Re: Small Block Stroker Carb Size	justinp61	12/31/12 10:03 PM
Re: Small Block Stroker Carb Size	ScottSmith_Harms	12/31/12 10:52 PM
Re: Small Block Stroker Carb Size	pittsburghracer	12/31/12 11:03 PM
Re: Small Block Stroker Carb Size	gtsdon	12/31/12 11:21 PM
Re: Small Block Stroker Carb Size	412 SB Duster	01/01/13 12:30 AM
Re: Small Block Stroker Carb Size	hp340nos	01/01/13 12:46 AM
Re: Small Block Stroker Carb Size	Triple Threat	01/01/13 12:59 AM
Re: Small Block Stroker Carb Size	Belvedere2	01/01/13 07:34 PM
Re: Small Block Stroker Carb Size	dusterjp	01/03/13 02:22 AM
Re: Small Block Stroker Carb Size	Crizila	01/03/13 04:09 AM
Re: Small Block Stroker Carb Size	Stroker Scamp	01/04/13 06:24 AM
Re: Small Block Stroker Carb Size	Scamp408	01/04/13 11:52 AM
Re: Small Block Stroker Carb Size	Streetwize	01/04/13 02:01 PM
Re: Small Block Stroker Carb Size	Brian Hafliger	01/03/13 03:03 AM
Re: Small Block Stroker Carb Size	Plymouth340	01/03/13 03:56 AM

Hop To