Quote:

big blocks and small blocks will use the same welded on tabs but different engine mounts.


i'm 99.9% sure that the modern hemi uses a different weld on tab. so yes you will have to cut the tabs off the alter-k and weld the new ones on. the engine side brackets are easy, bill sells them.. he will also sell you the tabs to weld on.



Correct

small/big block , gen3 hemi, 426 hemi All use different tabs welded on.

Your options

1. Cut the tabs off use a motorplate.

2. Cut off your old brackets and Bill can send you the gen3 brackets to weld in

3. Send your k-frame back to Bill and he will weld the correct tabs on

I talked to Bill about a year ago about this
2 or 3 you will need to get your k-frame repowder coated, i not sure how much he charges for option 2 or 3

Last edited by 540challenger; 12/09/12 09:29 PM.