|
Re: Bushing the Comp Cams Pro Magnum Rockers
[Re: Meangreen68]
#1328952
10/31/12 07:15 PM
10/31/12 07:15 PM
|
Joined: Jan 2003
Posts: 75,102 A Banana Republic near you.
JohnRR
I Win
|
I Win
Joined: Jan 2003
Posts: 75,102
A Banana Republic near you.
|
Quote:
I spoke with Comp Cams moments ago (800-999-0853).
They aren't willing to help.
No bushings, a trade-in, or a credit towards the purchase of a new set.
They did say if they fail, they'll give me a new set, excluding labor
Well if they fail you'll get a bushed set in return.
Is your cam a soild Flat tappet , Hyd. flat tappet, solid Roller, or a Hyd. roller ?
Should be easy to find the spring specs by looking up your springs on the manufacturer website .
Unless you are running a solid roller I don't think you'll have an issue , the picture you posted above was from someone using a solid roller , if solid roller is your cam choice you really want to run a set of Harland Sharps .
I feel that hughes shaft you added above has too much critical load area removed , a bananna groove would be better and easy to do with the shafts you have if that are not grooved.
|
|
|
|
|
|