Quote:

Car runs 9.60's and I want to get it above 10.00's.....buddy of mine has a similar et, and he disconnected the secondaries on the carb, dropped him into the 10.20's. that is what I would like to do. So, my question is will that make the car run lean??



I slowed my car with a mech throttle stop... it goes
about 1/3 throttle then I adjust the launch rpm and
the shift point... you would need to take way too
much timing out so I wouldnt even look at that...
with the mech stop it opens both blades some so
you get equal distribution