Just to be sure I checked my work. Unbolted the master cylinder from the booster and the brakes released somewhat. Before I start removing the brake block I want to eliminate a too long pushrod. I looked under the dash and see no pushrod? This car has the Hemi brake booster with the levers. Where is the adjustment? Not under the dash obviously.....in the engine bay behind the booster perhaps?

The RAM MAN did not provide the brake block, only the booster which seems to be a very good unit. I purchased the brake block seperately from Inline Tube about three years ago.

When I purchased the brake block it was a complete unit with the prop valve attached to the same mounting arm. Not sure if this is the correct unit. Seems I have seen other B bodies with the rear prop valve, or maybe it is a rear bias valve, bolted to the frame under the car downstream from the block? Do I have an incorrect brake block for a 70 B body? Is the prop valve and the bias valve two seperate issues here?