Hey gang..
Putting together the MSD 6AL system on my friend '71 Challenger R/T. Curious, all the wires seem to be rather obvious for me, except the red wire that apparently, according to the wiring diagram supplied, goes to the original coil + wire. Would that be the 12V feed on the ballast resistor? It seems on the 6-series modules, the white wire isn't used. Also, apparently you can order the harness PN 8860...
Thanks..
Troy
TroyHouston Mopar Connection Club'69 Charger Daytona 440 - auto - 4.10 Dana (now with 426 hemi)
'69 Charger 500 440 - 4speed - 3.54 Dana
'70 Road Runner 383 - 4speed - a/c (now with 440)