After working on my ride for the last year , I was ready to fire it up today and have run into starting problem. I am just can't figure it out ,it makes no sense to me on what it is doing,
Cranks over with the key and I have power to the yellow wire on ING side of the starter solenoid and just cranks and cranks , if I jump across the solenoid between the battery and the starter solenoid wire it starts right up, does the same if I remove the yellow ING wire and just jump the solenoid.

Ignition MSD6 box -New
MSD coil-New
Mopar Distributor Gap set to .08
Mopar constant voltage regulator

I just don't get it, I could see if it did not crank with the key and I had to jump the solenoid
Any ides?