Quote:

Quote:

Thanks Greg. I have Eddy heads and the early 70's stock chrome valve covers. I'm not the brightest bulb on the tree...but how thick is .050 in inches? I might be interested in what you have. I just purchased some 3/32 gasket material and may cut my own out if I can't find something soon.
Russ



1/16 is .062 so .050 is thinner. Eddy heads are taller than stock so that explains the issue .

3/32 is .093 ... thicker than 1/16 but not 1/8



Thank you John:) I know I should have been able to figure it out but I just couldn't get it right. I didn't realize the Eddy's were taller, but with that and the taller valve covers, it just adds to the issue. I think I'm taking the 3/32 back and try the 1/16 material.
Have always valued you input John...thanks again.
Russ

BigBlock 74 Swinger