Quote:

---

Going to dyno my 496 tommrow. I am so exited!!! Just wondering what everyone thinks it will make for tq/HP

Specs
496 Using Muscle Motors kit. Should be little north of 10-1 Compression
Edelbrock head CNC ported by Modern Cylinder heads. Flow 328int/268ex.
Solid Roller cam by Straighline
w 1.5 rockers.
Intake .645 Duration 300 [Email]Centerline@108[/Email]
Ex. .626 Duration 314 Centerline @116

Intake is a ported Holley SD to clear my hood on my RR. Also going to try a M1 on the dyno
950 Demon for a carb.

---

The cam looks like a blower or NOS cam so my guess testing it N/A will be around 650, maybe as high as 675 HP and 610 to 630 Ft Lbs My 505 with Jeffs CNC RPM heads made 687 HP at 5900 RPM with a 1050 Dominator on a M1 and 1.0 inch open phenolic spacer with a lot smaller roller cam Good luck