If you are wondering why i put the holes in the front lip of the floor its because it was easier to weld and grind to the firewall from the backside, the frame rail areas are always troublesome to clean up good...
Firewall welded up fitment is great...
Since i had the opportunity to get good coverage with paint on the firewall i did, sloppy factory style seem sealer applied as well...
I Then proceeded to mock up the front end again. Everything looks good! After clamping them in the inner fenders were 1/16" out of square with each other and the body. After a little tweaking everything looked good...
Now onto the next project...Replacing the shock towers...
