Quote:

Quote:

What is the easiest/simplest/least expensive method of going from 2.00 to 2.100 installed height?

We just got finished measuring the springs on my heads and for the replacement springs I'll need, I'm gonna have to bump up to the 2.100..

Currently there is a .060 shim on the intake and .030 shim on the exhaust..

Thanks

Maybe +.050 keepers and + .050 retainers, if there available That or .100 longer valves with the keeper grooves moved up .100 Or get a different set of valve springs that will fit into your existing parts with the pressures you want The countless joys of building race motors



Or have the pockets cut .050 deeper IF you have the
material in the pocket and +.050 locks