this is the controller that is on the fans now. The way I have it set up is the same way it was hooked up on the truck of the guy I got the whole setup from because I could not find instructions anywhere.

Connections are set up as follows:

c-ground to frame
2-ground wires from the fan
I have the power wires from the fan connected directly to the "keyed" 12v source on the fusebox so it only gets power during run, and there are fuses between the fan and the keyed 12v. It works this way but I dont like all that current going through that connection.

Before I buy a relay setup, I was wondering if what I have can be setup differently to where it allows me to connect the fans power wires directly to constant 12v and not have the fans get power when car is not in run.

If not, do you have a part number for a relay that can be had at autozone, advance, o'reilly's, etc...

thanks
roe