HP loss 1 1/2" Shorty v 1 7/8" Long Tube Headers ?

Print Thread

Re: HP loss 1 1/2" Shorty v 1 7/8" Long Tube Headers ? [Re: finadk] #1175509 02/13/12 07:32 PM 02/13/12 07:32 PM
Joined: Sep 2007 Posts: 576 Escondido, CA kick_the_reverb mopar
kick_the_reverb mopar Joined: Sep 2007 Posts: 576 Escondido, CA	Good to hear, hope the Tri-Y's work well for you. Anyway, for anyone looking for shelf 1 7/8" headers with a totally different routing then the normal car headers, check out the Spintech (probably cheaper than paying to custom build). Good luck, Ran "Hey mister, something's wrong with your car, it idles roughly" - number one comment I got in Israel when daily driving a 70 Barracuda with a lopey cam. Currently working on - 1966 Dodge A100 van 318/auto Finally - disc brakes on the front. In the plans - rear disc brakes, B&M 250 blower

Entire Thread
Subject	Posted By	Posted
HP loss 1 1/2" Shorty v 1 7/8" Long Tube Headers ?	finadk	02/09/12 08:05 PM
Re: HP loss 1 1/2" Shorty v 1 7/8" Long Tube Headers ?	kick_the_reverb	02/09/12 08:32 PM
Re: HP loss 1 1/2" Shorty v 1 7/8" Long Tube Headers ?	finadk	02/10/12 05:11 AM
Re: HP loss 1 1/2" Shorty v 1 7/8" Long Tube Headers ?	kick_the_reverb	02/11/12 12:20 AM
Re: HP loss 1 1/2" Shorty v 1 7/8" Long Tube Headers ?	finadk	02/11/12 03:32 AM
Re: HP loss 1 1/2" Shorty v 1 7/8" Long Tube Headers ?	finadk	02/13/12 01:10 AM
Re: HP loss 1 1/2" Shorty v 1 7/8" Long Tube Headers ?	kick_the_reverb	02/13/12 11:32 PM
Re: HP loss 1 1/2" Shorty v 1 7/8" Long Tube Headers ?	finadk	03/06/12 05:04 AM

Hop To