Quote:

---

Quote:

---

Still the stock suspension with a few up grades.

We boxed in the lower arms and tightened up the t-bar pivots, Reiley motorsports soild strut rods and upper control arms with heim joints,11/16 tie rods and PST adjusting sleeves, firmfeel pivot pins and poly bushings and new upper and lower balljoints.I have pics if interested.

---

Why get the pins? What's the advantage over stock?

---

The stock pins have a step built in so the inner steel shell of the control arm bushing will fit. That inner shell is NOT perfectly round. The firm feel pins do not have the step so it fits perfectly inside of the bushing without using the inner shell. They are also greasable. Stock pins are almost 40 years old so they had been on the car long enough.