I am trying to start a fresh 440 6pack and i cant get it to even try to fire.
i put the timing on tdc on the compression stroke at the no 1 cylinder, then set the distributor to point to the number 1 ignition wire, then cranked the motor to get fuel to the carbs and tried to start it. it just cranked. then i pulled one of the plug wires of and checked for spark and it had spark. i tried again to start it and it never even tried to start.i moved the distributor advanced and then retarded a litle with no luck, i also tried putting a small amount of gas down the center carb with no luck.

i am out of ideas.

any thing i may be missing?