I bought my stuff over 10 years ago.I went with BDS because of thier reputation but was disappointed in their after service.My 1st problem was a spun crank hub.Ordered a new one and had it overnighted to make a MOPAR weekend at English town.The hub they sent me was a half inch shorter then I had.When I called them{rather pissed off} they told me they hadn't produced that hub in 8 years.Concidering I got the setup 2 years prior it shows they sold me OLD STOCK to clear thier shelf.I have NEVER heard a bad word about Dyers and The Blower shop looks to have new billit cases that look very nice.I now also use an ATI super dampner rather than just a hub.Just remember to tell them to use a 2 inch register 'cause all the blower stuff like spacers & pullies are 2 inch and the stock mopar stuff is 2.25.I had to customize the pully {open up the id}to fit the dampner properly.