Quote:
does anybody have pics of a well made home made brace? I have access to just about everything i could ever need to do this. I am a ok welder at best, but my friend owns a welding fabrication business. He offered me the use of his shop, equipment and expertise... so i figured for the cost of the steel I could make my own. And be well ahead of a stock housing. If any pics are out there i would live to see them!
thank for all the input guys.
A back brace IMO mainly pevents bending of the Housing under extreme acceleration, good traction and High HP applications, and some twisting of same. Does little to help the R&P tooth interface, also IMo the weakest point after
the already mentioned Driver side cap.
Not worth it for OP IMO, and fpllow my suggestion, not what I do.
 
See pic #43 https://board.moparts.org/ubbthreads/show...part=1&vc=1
Reality check, that half the population is smarter then 50% of the people and it's a constantly contested fact.
| 
