Good way to estimate how much to mill an intake?

Print Thread

Re: Good way to estimate how much to mill an intake? [Re: BradH] #1063432 08/26/11 01:53 PM 08/26/11 01:53 PM
Joined: Jul 2010 Posts: 2,091 Delray beach, Florida P Performance Only top fuel
Performance Only top fuel P Joined: Jul 2010 Posts: 2,091 Delray beach, Florida	if you have half a bolt hole showing with no gaskets, shim it up until you are covering the bolt hole. you'll need to cut that amount plus 80%-85% of the thickness of the gasket you intend to run. machine shop owner and engine builder

Entire Thread
Subject	Posted By	Posted
Good way to estimate how much to mill an intake?	BradH	08/26/11 05:39 PM
Re: Good way to estimate how much to mill an intake?	dannysbee	08/26/11 05:46 PM
Re: Good way to estimate how much to mill an intake?	RATTRAP	08/26/11 05:50 PM
Re: Good way to estimate how much to mill an intake?	Performance Only	08/26/11 05:53 PM
Re: Good way to estimate how much to mill an intake?	clovis	08/26/11 06:19 PM
Re: Good way to estimate how much to mill an intake?	Crizila	08/26/11 06:38 PM
Re: Good way to estimate how much to mill an intake?	Performance Only	08/26/11 08:21 PM
Re: Good way to estimate how much to mill an intake?	bumps440	08/26/11 08:39 PM
Re: Good way to estimate how much to mill an intake?	polyspheric	08/27/11 12:23 AM
Re: Good way to estimate how much to mill an intake?	Crizila	08/26/11 10:41 PM
Re: Good way to estimate how much to mill an intake?	BradH	08/26/11 09:57 PM
Re: Good way to estimate how much to mill an intake?	dennismopar73	08/26/11 10:18 PM

Hop To