1/2" alum line to-an fitting - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 1/2" alum line to-an fitting

Print Thread

Re: 1/2" alum line to-an fitting [Re: toplescuda] #1059635 08/22/11 10:00 PM 08/22/11 10:00 PM
Joined: Jun 2003 Posts: 9,225 Charleston S sixpackgut Drag Week Mod Champion
sixpackgut Drag Week Mod Champion S Joined: Jun 2003 Posts: 9,225 Charleston	Quote: there hard line adapters sum-2200076 female-8 to 1/2" yes, we know that. did you put the ferrel on after the nut? Last edited by sixpackgut; 08/22/11 10:14 PM. Gen 3 power 6.22@110, 9.85@135 Follow @g3hemiswap on instagram performance only racing, CRT, ultimate converter, superior design concepts, ThumperCarbs

Entire Thread
Subject	Posted By	Posted
1/2" alum line to-an fitting	toplescuda	08/23/11 01:32 AM
Re: 1/2" alum line to-an fitting	MR_P_BODY	08/23/11 01:42 AM
Re: 1/2" alum line to-an fitting	sixpackgut	08/23/11 01:44 AM
Re: 1/2" alum line to-an fitting	toplescuda	08/23/11 01:55 AM
Re: 1/2" alum line to-an fitting	sixpackgut	08/23/11 02:00 AM
Re: 1/2" alum line to-an fitting	toplescuda	08/23/11 02:09 AM
Re: 1/2" alum line to-an fitting	scratchnfotraction	08/23/11 02:11 AM
Re: 1/2" alum line to-an fitting	toplescuda	08/23/11 02:14 AM
Re: 1/2" alum line to-an fitting	moparniac	08/23/11 02:21 AM
Re: 1/2" alum line to-an fitting	sixpackgut	08/23/11 02:31 AM
Re: 1/2" alum line to-an fitting	Cab_Burge	08/23/11 02:34 AM
Re: 1/2" alum line to-an fitting	Challenger 1	08/23/11 12:09 PM
Re: 1/2" alum line to-an fitting	sixpackgut	08/23/11 02:22 PM
Re: 1/2" alum line to-an fitting	toplescuda	08/23/11 04:21 PM
Re: 1/2" alum line to-an fitting	moparniac	08/23/11 02:04 AM
Re: 1/2" alum line to-an fitting	scratchnfotraction	08/23/11 02:09 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1