we ARE going to run shocks in the Rear and the front along with the air bags and today we decided we are going to change out the leaf springs in the rear for a triangulated 4 bar setup (I have it laying around).
the bags in the front when completely aired down set flat with the plate that mount them to the lower arm and they have an upward angle to them on the top plate where it is mounted to the frame so when the bag is aired UP it looks like the bag has a sharper angle to it but that is just the way it works out. we checked out this article where they did this on a toyota (check the link below) Ron...



link:
http://www.minitruckinweb.com/tech/chassis/0702mt_toyota_truck_front_air_bags/bag_mounts.html