Quote:

I would not use ARP moly grease on non ARP bolts where just regular oil is recommended - especially in blind holes. Your askin for trouble by doing so - IMO.



I agree with Crizila, as well as there have been some major changes in torque specs because of the new lubes that ARP is using. I use CMP lube on just about everything with a known stretch, but I'd almost rather use 30W than the "new" ARP lube.

RIP Monte Smith

Your work is a reflection of yourself, autograph it with quality.

WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.