Edelbrock SB 318/360 heads on a 340 - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Edelbrock SB 318/360 heads on a 340

Print Thread

Re: Edelbrock SB 318/360 heads on a 340 [Re: Baxter61] #1003426 05/31/11 12:54 PM 05/31/11 12:54 PM
Joined: Jan 2003 Posts: 8,033 Tulsa OK Bad340fish master
Bad340fish master Joined: Jan 2003 Posts: 8,033 Tulsa OK	Quote: just stuff a thicker gasket in there On his next build if he uses the same heads it is easier to source pistons for the 318/360 closed chamber. 68 Barracuda Formula S 340

Entire Thread
Subject	Posted By	Posted
Edelbrock SB 318/360 heads on a 340	CJK440	05/31/11 01:15 PM
Re: Edelbrock SB 318/360 heads on a 340	Streetwize	05/31/11 02:35 PM
Re: Edelbrock SB 318/360 heads on a 340	Baxter61	05/31/11 04:48 PM
Re: Edelbrock SB 318/360 heads on a 340	Bad340fish	05/31/11 04:54 PM
Re: Edelbrock SB 318/360 heads on a 340	11secaarcuda	05/31/11 05:27 PM
Re: Edelbrock SB 318/360 heads on a 340	65signet	05/31/11 10:43 PM
Re: Edelbrock SB 318/360 heads on a 340	RobX4406	05/31/11 10:53 PM
Re: Edelbrock SB 318/360 heads on a 340	CJK440	06/02/11 04:24 PM
Re: Edelbrock SB 318/360 heads on a 340	patrick	06/02/11 09:49 PM
Re: Edelbrock SB 318/360 heads on a 340	D-50	05/31/11 11:23 PM
Re: Edelbrock SB 318/360 heads on a 340	CJK440	06/01/11 12:58 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1