Quote:

I would love to know the specs on that build if you don't mind.



Looks like I was wrong,I thought the cam was in the 700 " lift range. But after looking back thru this thread,It appears to be more in the high 600" lift range.
Idle quality seemed the best about 1050-1100 rpm range. Anything less and it got kinda choppy, almost acted like it was starting to load up.
And anything less than 40 mph in 4th gear,and it was on the cam to much and got kind of jerky.
To be honest, I only drove it maybe 3 or 4 miles total before taking it home. But I could tell it was going to be a monster and it really wanted to be in the upper rpm range.
I can say it sounds REALLY REALLY good . My hats off to the builder.

Engine specs here ---> https://board.moparts.org/ubbthreads/show...part=1&vc=1