"Grudge Race" with YT 'stang guy didn't happen, but... - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech "Grudge Race" with YT 'stang guy didn't happen, but...

Print Thread

Page 2 of 2

1

2

Re: "Grudge Race" with YT 'stang guy didn't happen, but... [Re: Brad_Haak] #3227844 04/18/24 09:11 AM 04/18/24 09:11 AM
Joined: Jan 2003 Posts: 13,357 Marion, South Carolina [><] an8sec70cuda I Live Here
an8sec70cuda I Live Here Joined: Jan 2003 Posts: 13,357 Marion, South Carolina [><]	Nice improvement! CHIP '70 hemicuda, 575" Hemi, 727, Dana 60 '69 road runner, 440-6, 18 spline 4 speed, Dana 60 '71 Demon, 340, low gear 904, 8.75 '73 Chrysler New Yorker, 440, 727, 8.75 '90 Chevy 454SS Silverado, 476" BBC, TH400, 14 bolt '06 GMC 2500HD LBZ Duramax

Re: "Grudge Race" with YT 'stang guy didn't happen, but... [Re: an8sec70cuda] #3227846 04/18/24 09:15 AM 04/18/24 09:15 AM
Joined: May 2005 Posts: 4,717 Florida BDW master
BDW master Joined: May 2005 Posts: 4,717 Florida	What's the order of steps for the next weight reduction? Is a CF driveshaft in the plans?

Re: "Grudge Race" with YT 'stang guy didn't happen, but... [Re: BDW] #3227863 04/18/24 10:57 AM 04/18/24 10:57 AM
Joined: Dec 2021 Posts: 1,119 Loudoun County, VA Brad_Haak OP super stock
Brad_Haak OP super stock Joined: Dec 2021 Posts: 1,119 Loudoun County, VA	I've no plans to reduce the 1320's weight further; the driver could stand to lose about 40 lbs, but that's another project in itself The weather's decent now so I'm going to shift my focus back to the '73 2021 Challenger 6.4L Scat Pack 1320 100% stock: 1.680, 11.894 at 113.75 (DA 175 ft) weight reduction, wheels, tires, Hellcat air box: 1.661, 11.686 at 115.97 (DA 710 ft) 1973 Challenger 452 ci street/strip [2008] pump gas, DOT radials: 1.454, 10.523 at 126.44 (DA 514 ft)

Page 2 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1