|
Re: Thermostat Housing/Cover, Water Neck - Gen 3 Hemi
[Re: cbusters]
#2487669
04/25/18 09:04 AM
04/25/18 09:04 AM
|
Joined: Nov 2004
Posts: 25,050 Texas
GoodysGotaCuda
5.7L Hemi, 6spd
|
5.7L Hemi, 6spd
Joined: Nov 2004
Posts: 25,050
Texas
|
|
|
|
Re: Thermostat Housing/Cover, Water Neck - Gen 3 Hemi
[Re: cbusters]
#2487685
04/25/18 10:13 AM
04/25/18 10:13 AM
|
Joined: May 2005
Posts: 784 Florida
cbusters
OP
super stock
|
OP
super stock
Joined: May 2005
Posts: 784
Florida
|
|
|
|
Re: Thermostat Housing/Cover, Water Neck - Gen 3 Hemi
[Re: cbusters]
#2487731
04/25/18 12:05 PM
04/25/18 12:05 PM
|
Joined: Feb 2003
Posts: 18,582 Rust Belt, SW PA
Silver70
I Live Here
|
I Live Here
Joined: Feb 2003
Posts: 18,582
Rust Belt, SW PA
|
I've only noticed straight ones from the factory. So I made my own, cut and added a bend and welded back up... kept the lip on the end also so the hose stays on.
68 Road Runner, 69 Belvedere, 71 Challenger Vert 340 barracuda, 01 Ram CTD, 95 Ram, 04 Ram, 85 Daytona turbo Z 66 GTO, 06 Magnum RT AWD. 07 Ram CTD, 07 Ram
|
|
|
Re: Thermostat Housing/Cover, Water Neck - Gen 3 Hemi
[Re: Silver70]
#2487867
04/25/18 05:28 PM
04/25/18 05:28 PM
|
Joined: May 2005
Posts: 784 Florida
cbusters
OP
super stock
|
OP
super stock
Joined: May 2005
Posts: 784
Florida
|
I've only noticed straight ones from the factory. So I made my own, cut and added a bend and welded back up... kept the lip on the end also so the hose stays on. That is what I was seeing as a last resort. I was going to start looking for a real tight bent 1-3/4" 90 degree tube. Maybe another water outlet application that I can cut off.
|
|
|
|
|
|