cam ID? - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer cam ID?

Print Thread

cam ID? #1190486 03/03/12 09:11 PM 03/03/12 09:11 PM
Joined: Jan 2004 Posts: 1,468 N.Y. sixpacksteve OP pro stock
sixpacksteve OP pro stock Joined: Jan 2004 Posts: 1,468 N.Y.	i have a roller cam that says crane P 330HO 02177 anyone know what cam this is? Hell Hath No Fury Like Mine

Re: cam ID? [Re: sixpacksteve] #1190487 03/05/12 10:38 AM 03/05/12 10:38 AM
Joined: Jan 2011 Posts: 137 Daytona Beach, FL C cknight member
cknight member C Joined: Jan 2011 Posts: 137 Daytona Beach, FL	From the 1960's, this is an R-330-HC roller camshaft for a 426 hemi. Duration at .050" is 282 degrees on intake and exhaust. Lobe lift is .370", so gross valve lift with stock rockers is .581" intake, .562" exhaust. Lobe separation is 108 degrees. Recommended valve lash is .028" intake, .032" exhaust, at operating temperature. This is ground on a cast steel core, so it wouldn't be copper plated on the barrel. Regards, Chase Last edited by cknight; 03/07/12 04:54 PM.

Re: cam ID? [Re: sixpacksteve] #1190488 03/05/12 11:37 AM 03/05/12 11:37 AM
Joined: Aug 2003 Posts: 12,291 Kent, Wa 340SHORTY Truck Nut
340SHORTY Truck Nut Joined: Aug 2003 Posts: 12,291 Kent, Wa	WOW talk about service. I am truckless..

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1