Posted By: sixpacksteve
cam ID? - 03/04/12 01:11 AM
i have a roller cam that says crane P 330HO 02177
anyone know what cam this is?
anyone know what cam this is?
cam ID?
Posted By: cknight
Re: cam ID? - 03/05/12 02:38 PM
From the 1960's, this is an R-330-HC roller camshaft for a 426 hemi. Duration at .050" is 282 degrees on intake and exhaust. Lobe lift is .370", so gross valve lift with stock rockers is .581" intake, .562" exhaust. Lobe separation is 108 degrees. Recommended valve lash is .028" intake, .032" exhaust, at operating temperature. This is ground on a cast steel core, so it wouldn't be copper plated on the barrel. Regards, Chase
Posted By: 340SHORTY
Re: cam ID? - 03/05/12 03:37 PM
WOW talk about service. 