Can anyone post any stock '65 BB engine bay pics for my reference?

I'm sorting out the routing of hoses on our '65 Satellite w/361 and AC. It;s hard to figure out how the heater hoses get around the AC compressor and dual snorkels. I found photos of modified engine bays online, but nothing stock.

I'm working off my own photos from the disassembly, but the car definitely didn't have the original hose routes. So, I found one decent stock photo from an old Road & Track magazine.

I'm not a purist, just want it to go smoothly. "Plan B" is to install everything else first and see where the heater hoses fit in last.

Any help is appreciated.

Thanks,
-Art

Here's my progress as of yesterday

Here is my 62,same thing.You will need hose with 90 degree bends,Gates makes them.This isn't 100% correct but it is close.

i don't beleive the 65 is ths same as 62,i sold my 65 and deleted the engine pics.but the best move i can see is is the dual resivior master cylinder,ad a very bad expeirence with a broken flex line and single resivior master cyl.luckily no one was hurt.

This is a poly but my 65 factory manual shows the same for a B motor.

a shot for the outer side