|
Re: 70 383 factory push rod length
[Re: ebodyseast]
#988495
05/09/11 08:39 AM
05/09/11 08:39 AM
|
Joined: Jan 2003
Posts: 21,085 Niles , Ohio
therocks
oh wait.but hey.lets see.oh yeah.
|
oh wait.but hey.lets see.oh yeah.
Joined: Jan 2003
Posts: 21,085
Niles , Ohio
|
Not a 383 but my son bought Summits for his 62 413 when he changed cams.Been in for 10 years.No problems.Rocky
Chrysler Firepower
|
|
|
Re: 70 383 factory push rod length
[Re: ebodyseast]
#988496
05/09/11 09:20 AM
05/09/11 09:20 AM
|
Joined: Feb 2007
Posts: 217 New Port Richey, Florida
Wolfe440
OP
enthusiast
|
OP
enthusiast
Joined: Feb 2007
Posts: 217
New Port Richey, Florida
|
Quote:
Mopar Performance lists their replacement B push rods at the same spec I posted from their engine book, I'd consider choosing those first as it is when shopping for new... try summit or bpemopar, etc
Ok, I will go for the 8.57. Thanks for the help! Wolf.
|
|
|
Re: 70 383 factory push rod length
[Re: Wolfe440]
#988497
05/09/11 11:46 AM
05/09/11 11:46 AM
|
Joined: Jan 2003
Posts: 75,094 A Banana Republic near you.
JohnRR
I Win
|
I Win
Joined: Jan 2003
Posts: 75,094
A Banana Republic near you.
|
Quote:
Quote:
Mopar Performance lists their replacement B push rods at the same spec I posted from their engine book, I'd consider choosing those first as it is when shopping for new... try summit or bpemopar, etc
Ok, I will go for the 8.57. Thanks for the help! Wolf.
But what size does your engine NEED??? Have the heads been cut ??? The block deck cut to clean up???
|
|
|
Re: 70 383 factory push rod length
[Re: JohnRR]
#988498
05/09/11 12:53 PM
05/09/11 12:53 PM
|
Joined: Feb 2007
Posts: 217 New Port Richey, Florida
Wolfe440
OP
enthusiast
|
OP
enthusiast
Joined: Feb 2007
Posts: 217
New Port Richey, Florida
|
Quote:
Quote:
Quote:
Mopar Performance lists their replacement B push rods at the same spec I posted from their engine book, I'd consider choosing those first as it is when shopping for new... try summit or bpemopar, etc
Ok, I will go for the 8.57. Thanks for the help! Wolf.
But what size does your engine NEED??? Have the heads been cut ??? The block deck cut to clean up???
No history on what has been done with deck and heads being cut. I can buy push rods single, only 8 bucks each. I will purchase one and put it in and check preload for .035 and make any changes if needed from there before buying the whole set.
|
|
|
|
|
|