|
|
marks on hemi block need identifi?
#939202
02/27/11 08:17 PM
02/27/11 08:17 PM
|
Joined: Jan 2004
Posts: 1,468
N.Y.
sixpacksteve
OP
pro stock
|
OP
pro stock
Joined: Jan 2004
Posts: 1,468
N.Y.
|
have 66 hemi block with this mark, has a wierd cross and A sideways
does this mean anything? thanks
Hell Hath No Fury Like Mine
|
|
|
Re: marks on hemi block need identifi?
[Re: sixpacksteve]
#939203
02/27/11 08:49 PM
02/27/11 08:49 PM
|
Joined: Jan 2003
Posts: 25,750
Rio Linda, CA
John_Kunkel
Too Many Posts
|
Too Many Posts
Joined: Jan 2003
Posts: 25,750
Rio Linda, CA
|
The Maltese cross means .001" undersized crank, the A means .020" oversized cylinders.
The INTERNET, the MISinformation superhighway
|
|
|
Re: marks on hemi block need identifi?
[Re: John_Kunkel]
#939204
02/27/11 10:14 PM
02/27/11 10:14 PM
|
Joined: Jan 2004
Posts: 1,468
N.Y.
sixpacksteve
OP
pro stock
|
OP
pro stock
Joined: Jan 2004
Posts: 1,468
N.Y.
|
thats not a maltese cross
Hell Hath No Fury Like Mine
|
|
|
Re: marks on hemi block need identifi?
[Re: screamindriver]
#939206
02/28/11 01:07 AM
02/28/11 01:07 AM
|
Joined: Jan 2003
Posts: 10,707
North Dakota
6PakBee
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 10,707
North Dakota
|
I have no clue what the 'cross' means as it looks like it's stamped on the pan rail. The 'A' is probably the finished bore size at assembly.
"We live in a time when intelligent people are being silenced so that stupid people won't be offended".
|
|
|
Re: marks on hemi block need identifi?
[Re: 6PakBee]
#939207
03/01/11 06:18 AM
03/01/11 06:18 AM
|
Joined: Jan 2004
Posts: 1,468
N.Y.
sixpacksteve
OP
pro stock
|
OP
pro stock
Joined: Jan 2004
Posts: 1,468
N.Y.
|
the A is stamped next to cross,its a stock standard block
Hell Hath No Fury Like Mine
|
|
|
Re: marks on hemi block need identifi?
[Re: sixpacksteve]
#939208
03/06/11 03:34 PM
03/06/11 03:34 PM
|
Joined: Jan 2003
Posts: 10,707
North Dakota
6PakBee
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 10,707
North Dakota
|
I don't doubt that it's standard. But if you look in a FSM for '66, there is a cylinder bore size chart in Group 9 as follows: 'A' 4.24975" 'B' 4.25025" 'C' 4.25075" 'D' 4.25125" 'E' 4.25175 That's what I mean by if it's on the pan rail it's probably the finished bore size. 
"We live in a time when intelligent people are being silenced so that stupid people won't be offended".
|
|
|
|
|
|
|
