Need a 15x8 Steel Wheel with 4.5" BS or deeper...
#936039
02/23/11 09:23 PM
02/23/11 09:23 PM
|
Joined: Jan 2005
Posts: 2,179 S.E. Conn
Hoof Hearted
OP
top fuel
|
OP
top fuel
Joined: Jan 2005
Posts: 2,179
S.E. Conn
|
Currently running what I believe is a 4" or 4 1/4" BS Steel Wheel off mid eighties(?) RamCharger on my 69 Coronet w/275/60 Drag Radials but would like to tuck them in another 3/4" without moving the rear springs in (3" exhaust = a little tight) Anyone know of another year/model/application Mopar 15x8 Steely or even a Ford that would work? Been thinking about this for a few years. Thanks Pic shown with 15x6's all around...
2005 300C Hemi 2014 Ram ProMaster 2500
I Rekey, Repin old Chrysler locks and cut keys by code
|
|
|
Re: Need a 15x8 Steel Wheel with 4.5" BS or deeper...
[Re: Hoof Hearted]
#936040
02/23/11 09:25 PM
02/23/11 09:25 PM
|
Joined: Jan 2005
Posts: 2,179 S.E. Conn
Hoof Hearted
OP
top fuel
|
OP
top fuel
Joined: Jan 2005
Posts: 2,179
S.E. Conn
|
Pic with 15x8 out back, don't like the look...
2005 300C Hemi 2014 Ram ProMaster 2500
I Rekey, Repin old Chrysler locks and cut keys by code
|
|
|
Re: Need a 15x8 Steel Wheel with 4.5" BS or deeper...
[Re: Hoof Hearted]
#936041
02/23/11 09:44 PM
02/23/11 09:44 PM
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
Try Wheel Vintiques from Summitracing.com.
|
|
|
Re: Need a 15x8 Steel Wheel with 4.5" BS or deeper...
#936042
02/23/11 11:21 PM
02/23/11 11:21 PM
|
Joined: Jan 2005
Posts: 2,179 S.E. Conn
Hoof Hearted
OP
top fuel
|
OP
top fuel
Joined: Jan 2005
Posts: 2,179
S.E. Conn
|
I appreciate the pointers for New products but lookin for a Cheap way I.E. used.
2005 300C Hemi 2014 Ram ProMaster 2500
I Rekey, Repin old Chrysler locks and cut keys by code
|
|
|
Re: Need a 15x8 Steel Wheel with 4.5" BS or deeper...
[Re: Hoof Hearted]
#936043
02/24/11 01:02 AM
02/24/11 01:02 AM
|
Joined: Jan 2003
Posts: 75,004 U.S.S.A.
JohnRR
I Win
|
I Win
Joined: Jan 2003
Posts: 75,004
U.S.S.A.
|
Quote:
I appreciate the pointers for New products but lookin for a Cheap way I.E. used.
I don't think there is one , 15x8 wheels on mopar with a 4.5 bolt pattern come in 2 flavors , the wheel you have and a Super Coupe wheel .. THAT'S IT .
you either by a new wheel ... if it exists , or have one made ....
|
|
|
Re: Need a 15x8 Steel Wheel with 4.5" BS or deeper...
[Re: JohnRR]
#936044
02/24/11 03:35 AM
02/24/11 03:35 AM
|
Joined: Aug 2004
Posts: 1,213 Los Angeles, CA
Mobarge
pro stock
|
pro stock
Joined: Aug 2004
Posts: 1,213
Los Angeles, CA
|
Look at my sig. 15 X 7 up front, 15 X 10 out back.
'71 SSP - SOLD!
|
|
|
Re: Need a 15x8 Steel Wheel with 4.5" BS or deeper...
[Re: Hoof Hearted]
#936045
02/24/11 03:57 AM
02/24/11 03:57 AM
|
Joined: Aug 2004
Posts: 3,310 Walnut Creek, CA
blown340
master
|
master
Joined: Aug 2004
Posts: 3,310
Walnut Creek, CA
|
I don't know where your located, so shipping costs might be a issue, but I've had stockton wheel modify a stock set of wheels for me before to a custom backspacing for a pretty reasonable price. www.stocktonwheel.com The website isn't very good but it gets you a phone number.
|
|
|
Re: Need a 15x8 Steel Wheel with 4.5" BS or deeper...
[Re: Hoof Hearted]
#936046
02/24/11 07:38 AM
02/24/11 07:38 AM
|
Joined: Jan 2005
Posts: 4,862 the frozen wastes...
Pale_Roader
Swears too much
|
Swears too much
Joined: Jan 2005
Posts: 4,862
the frozen wastes...
|
Quote:
I appreciate the pointers for New products but lookin for a Cheap way I.E. used.
Heh... hate to break it to ya, but the wheels you have are it, and they are probably bringing in used what new wheels would cost anyways. Maybe sell your 15x8's and use the coin for new custom ones? Lots ov options.
|
|
|
Re: Need a 15x8 Steel Wheel with 4.5" BS or deeper...
[Re: Hoof Hearted]
#936048
02/24/11 12:25 PM
02/24/11 12:25 PM
|
Joined: Jan 2003
Posts: 8,940 Holly/MI
Dean_Kuzluzski
master
|
master
Joined: Jan 2003
Posts: 8,940
Holly/MI
|
Quote:
You might be right. I have a disc brake setup from a Duster going on in the spring, I hear that may bring the front wheels at a bit, offseting the goofy look I have now. Yes, I said goofy.
No disrespect here, you have an awesome/sweet B-body.
But, you're too particular for yor own budget. That traditional big/little offset is the nature-of-the-beast. Either run the same size all the way around (not street/strip for sure) or learn to live with it.
Over the years, the custom deal, like from Stockton, is the only fix I've seen or heard of.
R.I.P.- Gary "Coop" Davis 02/09/68-05/13/04
|
|
|
Re: Need a 15x8 Steel Wheel with 4.5" BS or deeper...
[Re: Mobarge]
#936049
02/24/11 12:56 PM
02/24/11 12:56 PM
|
Joined: Jan 2003
Posts: 75,004 U.S.S.A.
JohnRR
I Win
|
I Win
Joined: Jan 2003
Posts: 75,004
U.S.S.A.
|
Quote:
Look at my sig. 15 X 7 up front, 15 X 10 out back.
And the 15x10 wheel was standard on what car/pickup from the factory ?
|
|
|
Re: Need a 15x8 Steel Wheel with 4.5" BS or deeper...
[Re: Hoof Hearted]
#936050
02/24/11 12:58 PM
02/24/11 12:58 PM
|
Joined: Jan 2003
Posts: 75,004 U.S.S.A.
JohnRR
I Win
|
I Win
Joined: Jan 2003
Posts: 75,004
U.S.S.A.
|
Quote:
Quote:
Quote:
I appreciate the pointers for New products but lookin for a Cheap way I.E. used.
Heh... hate to break it to ya, but the wheels you have are it, and they are probably bringing in used what new wheels would cost anyways. Maybe sell your 15x8's and use the coin for new custom ones? Lots ov options.
You might be right. I have a disc brake setup from a Duster going on in the spring, I hear that may bring the front wheels at a bit, offseting the goofy look I have now. Yes, I said goofy.
That wheel offset is only an issue when switching the LBP disc setup onto the 72 down A body with small bolt pattern wheels .
|
|
|
Re: Need a 15x8 Steel Wheel with 4.5" BS or deeper...
[Re: JohnRR]
#936051
02/24/11 02:00 PM
02/24/11 02:00 PM
|
Joined: Jan 2004
Posts: 4,566 Motor City
6PKRTSE
master
|
master
Joined: Jan 2004
Posts: 4,566
Motor City
|
I had 15x10's made for the back of my Coronet with 275/60/15's on the back. WeldCraft in Livonia Michigan did them for me. Very inexpensive & looked awesome done.
1963 Belvedere 440 Max Wedge Tribute 1970 Charger R/T S.E. 440 Six Pack 1970 Challenger R/T, 528 Hemi 1970 Charger 500 S.E. 440 4 BBL 1970 Plymouth Road Runner 383 1974 Chrysler New Yorker 440 1996 2500 RAM 488 V-10 4X4 2004 3500 Dually Cummins 4x4 2012 Challenger R/T Classic.
|
|
|
Re: Need a 15x8 Steel Wheel with 4.5" BS or deeper...
[Re: 6PKRTSE]
#936052
02/24/11 04:34 PM
02/24/11 04:34 PM
|
Joined: Jan 2005
Posts: 2,179 S.E. Conn
Hoof Hearted
OP
top fuel
|
OP
top fuel
Joined: Jan 2005
Posts: 2,179
S.E. Conn
|
Quote:
I had 15x10's made for the back of my Coronet with 275/60/15's on the back ... looked awesome done.
Ya See, I disagree. I had the same setup 20 years ago on my 70 Challenger, Air shocks blew out and tore up my perfectly sculptered Bondo'd rear quarter wheel lips. White smoke everywhere, you'd think I ran over Scarface himself. It looks Butt ugly and Stands Out Too Far. If it makes you feel better, refer to my original post and dilema and you'll see clearly I want them tucked in a little more.
If I wanted the "Rear Wheels hanging out past the wheel well look" i'd drive a quarter mile up the road where I saw a perfectly good Racoon tail attached to what used to be the rest of it's flatenned bloodied body, Lop it off and hang it from my antenna to go with the Fuzzy Dice hanging from my rear view mirror and rainbow "peace" stickers on all the windows.
The 80's are over and the 70's, well...
I'm glad you had the chance to post your R/T. You do have a terrific looking R/T there, Love the red interior. Would look better with the rear wheels tucked in.
2005 300C Hemi 2014 Ram ProMaster 2500
I Rekey, Repin old Chrysler locks and cut keys by code
|
|
|
Re: Need a 15x8 Steel Wheel with 4.5" BS or deeper...
[Re: Hoof Hearted]
#936053
02/24/11 06:04 PM
02/24/11 06:04 PM
|
Joined: Jan 2003
Posts: 75,004 U.S.S.A.
JohnRR
I Win
|
I Win
Joined: Jan 2003
Posts: 75,004
U.S.S.A.
|
Quote:
Quote:
I had 15x10's made for the back of my Coronet with 275/60/15's on the back ... looked awesome done.
Ya See, I disagree. I had the same setup 20 years ago on my 70 Challenger, Air shocks blew out and tore up my perfectly sculptered Bondo'd rear quarter wheel lips. White smoke everywhere, you'd think I ran over Scarface himself. It looks Butt ugly and Stands Out Too Far. If it makes you feel better, refer to my original post and dilema and you'll see clearly I want them tucked in a little more.
If I wanted the "Rear Wheels hanging out past the wheel well look" i'd drive a quarter mile up the road where I saw a perfectly good Racoon tail attached to what used to be the rest of it's flatenned bloodied body, Lop it off and hang it from my antenna to go with the Fuzzy Dice hanging from my rear view mirror and rainbow "peace" stickers on all the windows.
The 80's are over and the 70's, well...
I'm glad you had the chance to post your R/T. You do have a terrific looking R/T there, Love the red interior. Would look better with the rear wheels tucked in.
I think you need to have your glasses checked , those wheels are NOT hanging outside the quarters and the rear is not jacked up. The Dodge B body has some big wheelwells and you can tuck a big tire inside, he was just showing you and option you could consider considering you are going to have the wheels MADE the way you want them because you aren't going to find them in the junkyard .
|
|
|
Re: Need a 15x8 Steel Wheel with 4.5" BS or deeper...
[Re: JohnRR]
#936054
02/24/11 07:38 PM
02/24/11 07:38 PM
|
Joined: Jan 2005
Posts: 2,179 S.E. Conn
Hoof Hearted
OP
top fuel
|
OP
top fuel
Joined: Jan 2005
Posts: 2,179
S.E. Conn
|
Quote:
Quote:
Quote:
I had 15x10's made for the back of my Coronet with 275/60/15's on the back ... looked awesome done.
Ya See, I disagree. I had the same setup 20 years ago on my 70 Challenger, Air shocks blew out and tore up my perfectly sculptered Bondo'd rear quarter wheel lips. White smoke everywhere, you'd think I ran over Scarface himself. It looks Butt ugly and Stands Out Too Far. If it makes you feel better, refer to my original post and dilema and you'll see clearly I want them tucked in a little more.
If I wanted the "Rear Wheels hanging out past the wheel well look" i'd drive a quarter mile up the road where I saw a perfectly good Racoon tail attached to what used to be the rest of it's flatenned bloodied body, Lop it off and hang it from my antenna to go with the Fuzzy Dice hanging from my rear view mirror and rainbow "peace" stickers on all the windows.
The 80's are over and the 70's, well...
I'm glad you had the chance to post your R/T. You do have a terrific looking R/T there, Love the red interior. Would look better with the rear wheels tucked in.
I think you need to have your glasses checked , those wheels are NOT hanging outside the quarters and the rear is not jacked up. The Dodge B body has some big wheelwells and you can tuck a big tire inside, he was just showing you and option you could consider considering you are going to have the wheels MADE the way you want them because you aren't going to find them in the junkyard .
Thank You, AmbuLance chaser.
New Eye Glasses for all my men!
Listen, Can't make it any clearer. I have 15x8's with room to spare between the Leafs and the wheels and looking to bring them in close enough for the tires to almost kiss the springs and...
... and nothin. That's about it.
Looking for nothing larger than a 15x8 and 15x10's are Too Big and gawdy for Any Pre-71 B-Body with a stock axle width.
2005 300C Hemi 2014 Ram ProMaster 2500
I Rekey, Repin old Chrysler locks and cut keys by code
|
|
|
Re: Need a 15x8 Steel Wheel with 4.5" BS or deeper...
[Re: Hoof Hearted]
#936057
02/24/11 09:18 PM
02/24/11 09:18 PM
|
Joined: Jan 2004
Posts: 6,445 Missouri
68KillerBee
master
|
master
Joined: Jan 2004
Posts: 6,445
Missouri
|
Quote:
Thank You, AmbuLance chaser.
New Eye Glasses for all my men!
Listen, Can't make it any clearer. I have 15x8's with room to spare between the Leafs and the wheels and looking to bring them in close enough for the tires to almost kiss the springs and...
... and nothin. That's about it.
Looking for nothing larger than a 15x8 and 15x10's are Too Big and gawdy for Any Pre-71 B-Body with a stock axle width.
|
|
|
Re: Need a 15x8 Steel Wheel with 4.5" BS or deeper...
[Re: 68KillerBee]
#936058
02/24/11 09:44 PM
02/24/11 09:44 PM
|
Joined: Sep 2003
Posts: 3,426 weymouth,mass.
meepmeep70
master
|
master
Joined: Sep 2003
Posts: 3,426
weymouth,mass.
|
Quote:
Quote:
Thank You, AmbuLance chaser.
New Eye Glasses for all my men!
Listen, Can't make it any clearer. I have 15x8's with room to spare between the Leafs and the wheels and looking to bring them in close enough for the tires to almost kiss the springs and...
... and nothin. That's about it.
Looking for nothing larger than a 15x8 and 15x10's are Too Big and gawdy for Any Pre-71 B-Body with a stock axle width.
68killer! LOOKS AWESOME
|
|
|
|
|