"C" clip eliminators. - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech "C" clip eliminators.

Print Thread

Page 1 of 4

1

2

3

4

"C" clip eliminators. #934217 02/21/11 10:12 PM 02/21/11 10:12 PM
Joined: Oct 2003 Posts: 7,506 Az Crizila OP master
Crizila OP master Joined: Oct 2003 Posts: 7,506 Az	Who has installed them in a 9 1/4? Are they necessary for an 11 second car? Thanks, John Fastest 300

Re: "C" clip eliminators. [Re: Crizila] #934218 02/21/11 10:46 PM 02/21/11 10:46 PM
Joined: Dec 2009 Posts: 1,074 detroit, mi POS Dakota super stock
POS Dakota super stock Joined: Dec 2009 Posts: 1,074 detroit, mi

Re: "C" clip eliminators. [Re: Crizila] #934219 02/21/11 11:03 PM 02/21/11 11:03 PM
Joined: Jun 2010 Posts: 3,112 LONG ISLAND fishy340 master
fishy340 master Joined: Jun 2010 Posts: 3,112 LONG ISLAND	DIDNT THINK MOPAR REARS HAS C CLIPS

Re: "C" clip eliminators. [Re: fishy340] #934220 02/21/11 11:10 PM 02/21/11 11:10 PM
Joined: Sep 2006 Posts: 47 ohio 6440nssa member
6440nssa member Joined: Sep 2006 Posts: 47 ohio	All 8.25 and 9.25 chrysler rear axles have c-clips. sean dornan

Re: "C" clip eliminators. [Re: 6440nssa] #934221 02/21/11 11:11 PM 02/21/11 11:11 PM
Joined: Jun 2010 Posts: 3,112 LONG ISLAND fishy340 master
fishy340 master Joined: Jun 2010 Posts: 3,112 LONG ISLAND	I learned today,so thats a good thing

Re: "C" clip eliminators. [Re: Crizila] #934222 02/21/11 11:23 PM 02/21/11 11:23 PM
Joined: May 2006 Posts: 1,260 New Mexico A Adobedude pro stock
Adobedude pro stock A Joined: May 2006 Posts: 1,260 New Mexico	Quote: Who has installed them in a 9 1/4? Are they necessary for an 11 second car? Thanks, John No c-clip eliminators for a 9.25. Last edited by Adobedude; 02/21/11 11:28 PM. 2001 Dodge Dakota 408 All Motor 11.27 @ 117.83 mph 2017 NM Mopar Challenge Series Champion.

Re: "C" clip eliminators. [Re: Adobedude] #934223 02/21/11 11:25 PM 02/21/11 11:25 PM
Joined: Jun 2010 Posts: 3,112 LONG ISLAND fishy340 master
fishy340 master Joined: Jun 2010 Posts: 3,112 LONG ISLAND	im confused c clips or no c clips on those rears?

Re: "C" clip eliminators. [Re: fishy340] #934224 02/21/11 11:27 PM 02/21/11 11:27 PM
Joined: May 2006 Posts: 1,260 New Mexico A Adobedude pro stock
Adobedude pro stock A Joined: May 2006 Posts: 1,260 New Mexico	No c-clip eliminators. 2001 Dodge Dakota 408 All Motor 11.27 @ 117.83 mph 2017 NM Mopar Challenge Series Champion.

Re: "C" clip eliminators. [Re: Crizila] #934225 02/21/11 11:30 PM 02/21/11 11:30 PM
Joined: Oct 2005 Posts: 2,611 Elbridge, NY D Dart1031 master
Dart1031 master D Joined: Oct 2005 Posts: 2,611 Elbridge, NY	Quote: Who has installed them in a 9 1/4? Are they necessary for an 11 second car? Thanks, John I don't think you need them until you're in the 10's. I've been 11.50's with a 7.5" GM 10 bolt with stock axles and c-clips and no one asked about the eliminators.

Re: "C" clip eliminators. [Re: Dart1031] #934226 02/21/11 11:43 PM 02/21/11 11:43 PM
Joined: Jan 2003 Posts: 20,187 Park Forest, IL slantzilla Too Many Posts
slantzilla Too Many Posts Joined: Jan 2003 Posts: 20,187 Park Forest, IL	Call Moser. If they don't have some they can probably make you some. "Everybody funny, now you funny too."

Re: "C" clip eliminators. [Re: slantzilla] #934227 02/22/11 10:59 AM 02/22/11 10:59 AM
Joined: Oct 2003 Posts: 7,506 Az Crizila OP master
Crizila OP master Joined: Oct 2003 Posts: 7,506 Az	Quote: Call Moser. If they don't have some they can probably make you some. Thanks big D. Will do. When ever I pull the axles to do diff work I always inspect them and they always look good - no wear on the "C" clips or axle grooves that the clips ride in. They just make me a little knowing that if one were to break, ------------------->. Fastest 300

Re: "C" clip eliminators. [Re: Crizila] #934228 02/22/11 11:28 AM 02/22/11 11:28 AM
Joined: Mar 2007 Posts: 9,336 South-Central (Sebring), FL Commando1 master
Commando1 master Joined: Mar 2007 Posts: 9,336 South-Central (Sebring), FL	I'm a tad under-informed on this. Can't see how you can run it w/o the C clips.

Re: "C" clip eliminators. [Re: Commando1] #934229 02/22/11 12:05 PM 02/22/11 12:05 PM
Joined: Oct 2004 Posts: 8,165 Left Coast B BobR master
BobR master B Joined: Oct 2004 Posts: 8,165 Left Coast	Quote: I'm a tad under-informed on this. Can't see how you can run it w/o the C clips. The eliminator kit makes the axles bolt in like the Dana. NHRA requires them for cars running 10.99 and under.

Re: "C" clip eliminators. [Re: slantzilla] #934230 02/22/11 12:23 PM 02/22/11 12:23 PM
Joined: May 2006 Posts: 1,260 New Mexico A Adobedude pro stock
Adobedude pro stock A Joined: May 2006 Posts: 1,260 New Mexico	Fast Dakota guys running the 9.25 have been all over this for years...Never been resolved, no one has ever had any made, if were that simple I'm certain they would have. Maybe the cost is too much. 2001 Dodge Dakota 408 All Motor 11.27 @ 117.83 mph 2017 NM Mopar Challenge Series Champion.

Re: "C" clip eliminators. [Re: Crizila] #934231 02/22/11 12:24 PM 02/22/11 12:24 PM
Joined: Jan 2003 Posts: 8,016 Polson, MT DoctorDiff master
DoctorDiff master Joined: Jan 2003 Posts: 8,016 Polson, MT	I would replace the housing ends and run custom axles with Green wheel bearings. Contact info

Re: "C" clip eliminators. [Re: Adobedude] #934232 02/22/11 12:38 PM 02/22/11 12:38 PM
Joined: Oct 2003 Posts: 7,506 Az Crizila OP master
Crizila OP master Joined: Oct 2003 Posts: 7,506 Az	Quote: Fast Dakota guys running the 9.25 have been all over this for years...Never been resolved, no one has ever had any made, if were that simple I'm certain they would have. Maybe the cost is too much. Has there been lots of breakage? Fastest 300

Re: "C" clip eliminators. [Re: DoctorDiff] #934233 02/22/11 12:41 PM 02/22/11 12:41 PM
Joined: May 2006 Posts: 1,260 New Mexico A Adobedude pro stock
Adobedude pro stock A Joined: May 2006 Posts: 1,260 New Mexico	That's what they are doing... 2001 Dodge Dakota 408 All Motor 11.27 @ 117.83 mph 2017 NM Mopar Challenge Series Champion.

Re: "C" clip eliminators. [Re: Crizila] #934234 02/22/11 12:44 PM 02/22/11 12:44 PM
Joined: May 2006 Posts: 1,260 New Mexico A Adobedude pro stock
Adobedude pro stock A Joined: May 2006 Posts: 1,260 New Mexico	Nope...9.2s5 will take a lot of abuse. Stock LSDs are junk, guys have shreadded a few gears....typical stuff. I want to ditch mine so I can run a spool. those aren't available either. Right now I have a locker. 2001 Dodge Dakota 408 All Motor 11.27 @ 117.83 mph 2017 NM Mopar Challenge Series Champion.

Re: "C" clip eliminators. [Re: Adobedude] #934235 02/22/11 03:12 PM 02/22/11 03:12 PM
Joined: Oct 2003 Posts: 7,506 Az Crizila OP master
Crizila OP master Joined: Oct 2003 Posts: 7,506 Az	Quote: Nope...9.2s5 will take a lot of abuse. Stock LSDs are junk, guys have shreadded a few gears....typical stuff. I want to ditch mine so I can run a spool. those aren't available either. Right now I have a locker. I'm running the same clutch pack thats in the Dana 60's. On my second clutch pack, but they seem to hold up pretty well. Per Randy's, new clutch pack should have a breakaway torque of 70 - 80 lbs. When it gets down to 20, time for a new clutch pack. Fastest 300

Re: "C" clip eliminators. [Re: BobR] #934236 02/22/11 08:52 PM 02/22/11 08:52 PM
Joined: Mar 2007 Posts: 9,336 South-Central (Sebring), FL Commando1 master
Commando1 master Joined: Mar 2007 Posts: 9,336 South-Central (Sebring), FL	Quote: Quote: I'm a tad under-informed on this. Can't see how you can run it w/o the C clips. The eliminator kit makes the axles bolt in like the Dana. NHRA requires them for cars running 10.99 and under. Got it now. I wouldn't know something involving running sub 11's...

Page 1 of 4

1

2

3

4

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1