360 block/head PN decoding help - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer 360 block/head PN decoding help

Print Thread

360 block/head PN decoding help #90294 07/18/08 12:14 PM 07/18/08 12:14 PM
Joined: Apr 2007 Posts: 82 WA GasHog72 OP member
GasHog72 OP member Joined: Apr 2007 Posts: 82 WA	I'm in the middle of a purchase of a 360 block and i have the part numbers from the block and heads but i can't find a lot of info on these. Any help would be appreciated. block casting number is 4179930-360 the heads are 4027538-360

Re: 360 block/head PN decoding help [Re: GasHog72] #90295 07/18/08 01:06 PM 07/18/08 01:06 PM
Joined: Jan 2003 Posts: 32,959 Grand Prairie,Texas stumpy I Win
stumpy I Win Joined: Jan 2003 Posts: 32,959 Grand Prairie,Texas	Try here. http://www.autohobbydigest.com/tables.php?03_Head-Casting-Numbers

Re: 360 block/head PN decoding help [Re: GasHog72] #90296 07/18/08 01:40 PM 07/18/08 01:40 PM
Joined: Jan 2003 Posts: 2,111 Bowie, MD R Reggie top fuel
Reggie top fuel R Joined: Jan 2003 Posts: 2,111 Bowie, MD	Quote: I'm in the middle of a purchase of a 360 block and i have the part numbers from the block and heads but i can't find a lot of info on these. Any help would be appreciated. block casting number is 4179930-360 the heads are 4027538-360 Check here... The block should be a 1976-1988 360. That head number (4027538) must be a part number rather than a casting number. 1975-1988 360 castings were 3671587, 3769974, 4027596, 4071051 and 4323345. Head casting number may be either on top over the intake runner or underneath under the exhaust runner.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1