Trying to get this 64 Savoy done. Working on finishing up the wiring right now.

#2

Just playin' in the shop....





...with some of Dads parts.

Working on mocking up parts for the challenger before sending out for a chassis cert 25.2 using the stock firewall for 10.5 outlaw. mocking up 33x10.5-16w tires.

Getting rid of metal not needed to save some money

Engine for project 540 cu in

after 12 years of parts sitting on shelves I decided to finish the running project that I had started back in 96..ok so its not a mopar ..

but it is a project..its my 69 Camaro...tubular upper and lower control arms with Carerra coil overs...Aerospace 4 piston brakes and 2" dropped spindles..

see I cut the coils to get my ride height and lost all the rebound in the shocks..so to get the ride height I went with dropped spindles and to get full shock action I went with coil overs for their adjustabilities..

I still have the 63 Dodge and if that doesnt get sold by spring, then I'll finish it up..

the Camaro]

WOW! Some awesome projects this winter, good luck to all of you! Cant wait for the summer!

Don

I am making some changes on the dart. bigger tires, wider rims with double bead locks, wheelie bars, rear wing, chute and opening up the motor to max wedge. thats about all for now.

Changing fuel cell in new Dakota race truck, adding new lexan, probably a bigger cam and freshen the heads.

'69 road runner, stock suspension, 275 radials, bench seat, column shifter, low budget.

doing the first two to pay for the third

2nd

when I get paid for these I can finish this
race pak,msd digital,596 -b-1 mc,chassis paint,new wiring,

ADDING 15 BARS TO GET THE CHASSIS BACK TO A 6.0 CERT.

[image][/image]

another 1

[image][/image]