1968 RR with 383 and power steering. I can not find a pitman arm. I have called the local stores and I have look for a moog part number. Does anyone know where to get one?
Thanks

Check with Rock Auto are get on e-bay.

I don;t think Rockauto lists them. Check with Firmfeel.com. If you find the Moog PN you can then search Rockauto by PN, because they MAY have it.

http://www.rareparts.com/

Look here.
If they don't have it, or can rebuild it, it doesn't exist.

Thanks for the help. Does anyone know why a pitman arm off a 1973 challenger will not work? Every other part is the same in the front end?

Thanks for the help. Does anyone know why a pitman arm off a 1973 challenger will not work? Every other part is the same in the front end?

---

The 73 and up arms have a larger splined bore, to fit the larger selector/steering shaft....


The Moog #'s/parts are discontinued,....Duralast has a replacement pn#20101 for your 68 RR, list price is $149, try Autozone or CarQuest for Duralast products

Mike

The diameter of the selector shaft that comes out the bottom of the steering gearbox, is different between a 1968 and a 1973 automobile.

What pitman arm should I get and from where? Which is the right one for me. 68 super bee 383 manual steering/brakes.

What would go on my dad's 68 gtx 440 power steering/power brakes.

We both have our front ends redone minus the pitman arm.
thanks in advance, didn't wanna start a new topic so piggybacked off this one.

If you can come up with a casting #, I may have one. My 70 Charger HAD a steering box from a 69 Charger until I swapped in a Firm Feel chuck and fast ratio arms. I have a few pitmans, so I will need a number to be of any help. If I have what you want, its yours for $20 plus shipping. Send me a PM and I will let you know what I have.
Greg

The Autozone pitman arm application for your 68 is FA408 regardless of power or maual steering box, previous PN was 20101 Autozone, that may still be good....$159

I got a pitman arm last summer for my '68 Road Runner from these guys:

http://www.kanter.com

The better approach is to replace your steering box with a 73 & later box with the large spline.... New pitman arms are readily available.... & it give you an opportunity to upgrade to a new Firm Feel Box...

$109, not a bad price

http://www.kanter.com///productdetail.as...=73&Prc=325

Try Year one i got one for my dads 68 pwr steering charger there.

Just remember you need a puller to take the pitman off the box.Rocky

The guys at www.firmfeel.com can get you what you need.

I got one for my 68 GTX from Rock Auto