we got 24" here in Seaford Long Island.
but doesent bother me, ill just melt it with my flamethrower and drive the neighbors nutz!!!!
im working on a dual head model on a handtruck to melt about 3 feet of 2 foot deep 24" wide path.
it runs on Diesel fuel and a tad of gasoline.
both guns run 200psi /.65 gal per hour. and it can even leave the cement dry......
here I was tuning one of the guns a couple weeks ago while my dog tryed to attack the roaring flame.

That wind is BRUTAL!! I used the Snow Bear snow plow for the first time on my new (to me) '07 Nissan 4x4. The truck worked fine but I bent the plow mounts. Not very well made for this application. I had this plow on my last truck ('89 Toyota) and the mount was much beefier. It would take a lot of abuse with no failures at all. I had to get the torches out and bend these back. I'll have to weld a gusset or something...

Well I for one miss it Not a problem if your prepared for it

Rickster

I shoveled 7"ast night and ended up with 19" more after that.

Quote:

---

I'll take the snow anyday over Pelosi...!

---

Less than a week to go..

all my operators went on skid steers w no cab,lmao there use to heated machines

yes.
i bolt two of em on an old weld tank cart,
plug em it at the head gets hot lean them down to a blue roaring flame. uses jut over 1.5 gals of fuel to do 100 ft sidewalk. in a hr, and almost zero laber cept roll it foward every 5 mins.

LMAO THATS COOL,merrick got 23"

you outta see what happens when we get 3" out this way, these A holes think the world is coming to an end, and yes i do run 7 snow plows, people just loose there mind