Engine Masters: SB hemi wins with 700HP!
#883155
12/18/10 04:54 PM
12/18/10 04:54 PM
|
Joined: Nov 2004
Posts: 226 lino lakes,MN
onebaddakota
OP
enthusiast
|
OP
enthusiast
Joined: Nov 2004
Posts: 226
lino lakes,MN
|
Did anyone else catch that? Normally I don't pay much attention to EM as it doesn't yield much useful tech, but I was blown away with the power they got out of such a tame combo. 5.7L block stroked to 417CI Bore: 3.95 stroke: 4.25 compr: 11.3 on 91 octane heads: 5.7( 2.18 intake/1.60 exhaust) Intake:drag pack single plane cam: 235/241 with 648 lift rockers: Jesel Accel DFI No coatings were used. The article dodn't say if these were the 5.7 09 eagle heads or the earlier castings. I bet the're the 09s. The only pricey thing I see is the Jesel setup. But good lord, 700HP@6500/621TQ @5200 on 91 with factory heads and a small hyd roller. It sure put the beat down on God's apparent gift to the SB world: The LS motor.
10.56 at 125.6, with a 1.43 60 ft.
E85, Hyd. Roller 410 magnum,full exhaust, 3500 race weight.
|
|
|
Re: Engine Masters: SB hemi wins with 700HP!
[Re: fishy340]
#883158
12/18/10 07:12 PM
12/18/10 07:12 PM
|
Joined: Oct 2004
Posts: 1,327 south central,Pa
mopar_to_ya
pro stock
|
pro stock
Joined: Oct 2004
Posts: 1,327
south central,Pa
|
This is what I was looking for a week ago. Good info! If you got more info on it, please post it. Thanks
It's a bigblock with a torque flight!!!
|
|
|
Re: Engine Masters: SB hemi wins with 700HP!
[Re: Leigh]
#883162
12/19/10 12:03 AM
12/19/10 12:03 AM
|
Joined: Jun 2003
Posts: 52,972 Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
That is pretty stout for a hyd roller... the whole thing sounds pretty tame and it still made those numbers... I have heard that their dyno is on the happy side but they all run on the same stuff...even if its 50hp high thats still pretty darn good
|
|
|
Re: Engine Masters: SB hemi wins with 700HP!
[Re: topbrent]
#883164
12/19/10 01:53 AM
12/19/10 01:53 AM
|
Joined: Nov 2004
Posts: 226 lino lakes,MN
onebaddakota
OP
enthusiast
|
OP
enthusiast
Joined: Nov 2004
Posts: 226
lino lakes,MN
|
I think they used K1 stuff on the internals. The 09 heads are a heck of a bargain at $600/pair complete. They even come with 16 iridium plugs. Those alone are worth over a $100! I know those flow 300 cfm @600. Porting shows the normal improvements in flow as well. Arrington and another company are in the production phase of rockers that will allow the use of solid rollers.
10.56 at 125.6, with a 1.43 60 ft.
E85, Hyd. Roller 410 magnum,full exhaust, 3500 race weight.
|
|
|
Re: Engine Masters: SB hemi wins with 700HP!
[Re: onebaddakota]
#883165
12/19/10 02:07 AM
12/19/10 02:07 AM
|
Joined: Jul 2006
Posts: 9,366 Lehigh Acres, Florida
rickstershemi
master
|
master
Joined: Jul 2006
Posts: 9,366
Lehigh Acres, Florida
|
Quote:
I think they used K1 stuff on the internals. The 09 heads are a heck of a bargain at $600/pair complete. They even come with 16 iridium plugs. Those alone are worth over a $100! I know those flow 300 cfm @600. Porting shows the normal improvements in flow as well. Arrington and another company are in the production phase of rockers that will allow the use of solid rollers.
I ran iridium plugs in my 5.7....they were only $3 a piece.....looks like that combo isn't really all that pricey other than the jesel pieces.....nice
Rickster
|
|
|
Re: Engine Masters: SB hemi wins with 700HP!
[Re: BradH]
#883167
12/19/10 04:19 AM
12/19/10 04:19 AM
|
Joined: Sep 2003
Posts: 10,645 Houston, Tx
AlexP
I Live Here
|
I Live Here
Joined: Sep 2003
Posts: 10,645
Houston, Tx
|
Once you see one of these motors up close, you'll see how it looks almost exactly like an LS with even more awesome heads. It may take years for the classic community to grasp what these motors are capable of, but when they do...hold on. I don't get on here as much, but if anyone needs 3g hemi advice shoot me a pm. I can help.
|
|
|
Re: Engine Masters: SB hemi wins with 700HP!
[Re: onebaddakota]
#883168
12/19/10 07:40 AM
12/19/10 07:40 AM
|
Joined: Aug 2004
Posts: 2,128 sweden
sshemi
top fuel
|
top fuel
Joined: Aug 2004
Posts: 2,128
sweden
|
Quote:
I think they used K1 stuff on the internals. The 09 heads are a heck of a bargain at $600/pair complete. They even come with 16 iridium plugs. Those alone are worth over a $100! I know those flow 300 cfm @600. Porting shows the normal improvements in flow as well. Arrington and another company are in the production phase of rockers that will allow the use of solid rollers.
Whats the story on these heads??? 600$ what? where?
|
|
|
Re: Engine Masters: SB hemi wins with 700HP!
[Re: onebaddakota]
#883169
12/19/10 08:51 AM
12/19/10 08:51 AM
|
Joined: Jun 2005
Posts: 793 Utah
topbrent
super stock
|
super stock
Joined: Jun 2005
Posts: 793
Utah
|
Quote:
The 09 heads are a heck of a bargain at $600/pair complete...I know those flow 300 cfm @600. Porting shows the normal improvements in flow as well.
With the huge expertise on tap at BES, I am afraid I don't think they just slapped some untouched $600.00 stocker heads on there. (note, I don't think that is what you are implying by suggesting that price.) But, just to be clear, BES put the serious dollars (parts and R&D) into that build to win the event. Definitely showed the capability of the platform, albeit very far from "stock parts."
Impressive engine with astounding power, but don't kid yourself into believing that this engine and the word budget could ever be considered in the same sentence. Replicating the results would involve a big bundle of cash.
|
|
|
Re: Engine Masters: SB hemi wins with 700HP!
[Re: onebaddakota]
#883171
12/19/10 03:02 PM
12/19/10 03:02 PM
|
Joined: Jan 2003
Posts: 344 Burlington, Ontario Canada
Dave_S
enthusiast
|
enthusiast
Joined: Jan 2003
Posts: 344
Burlington, Ontario Canada
|
You have a part number for these heads? all I can find are bare castings for $390 each!
Dave Stillie '73 Swinger 5.7 Hemi, 88mm turbo, powerglide, cal-tracs & 8 3/4 Mega-Squirt EFI [email]8.93@149 [/email]
|
|
|
Re: Engine Masters: SB hemi wins with 700HP!
[Re: topbrent]
#883173
12/19/10 05:36 PM
12/19/10 05:36 PM
|
Joined: Nov 2004
Posts: 226 lino lakes,MN
onebaddakota
OP
enthusiast
|
OP
enthusiast
Joined: Nov 2004
Posts: 226
lino lakes,MN
|
Quote:
Quote:
The 09 heads are a heck of a bargain at $600/pair complete...I know those flow 300 cfm @600. Porting shows the normal improvements in flow as well.
With the huge expertise on tap at BES, I am afraid I don't think they just slapped some untouched $600.00 stocker heads on there. (note, I don't think that is what you are implying by suggesting that price.) But, just to be clear, BES put the serious dollars (parts and R&D) into that build to win the event. Definitely showed the capability of the platform, albeit very far from "stock parts."
Impressive engine with astounding power, but don't kid yourself into believing that this engine and the word budget could ever be considered in the same sentence. Replicating the results would involve a big bundle of cash.
There's no question BES does great work. Having said that this isn't a build out of fantasy land. Several of the drag pack cars are approaching these numbers with all their restrictions. You can get a 630HP crate from Arrington with a warranty. The heads will certainly support the HP.
10.56 at 125.6, with a 1.43 60 ft.
E85, Hyd. Roller 410 magnum,full exhaust, 3500 race weight.
|
|
|
|
|