advice - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer advice

Print Thread

advice #845818 11/04/10 03:41 PM 11/04/10 03:41 PM
Joined: Feb 2005 Posts: 464 C cmansell OP mopar
cmansell OP mopar C Joined: Feb 2005 Posts: 464	I had a buddy call and wanted advice on a stock replacement piston set for a 68 hp motor in his gtx that was bored .030. He is going back stock except intake and carb. Any advice ?

Re: advice [Re: cmansell] #845819 11/04/10 05:31 PM 11/04/10 05:31 PM
Joined: Nov 2003 Posts: 36,041 Lincoln Nebraska R RapidRobert Circle Track
RapidRobert Circle Track R Joined: Nov 2003 Posts: 36,041 Lincoln Nebraska	1st I'd check out the KB hypers on either their site or 440sources' site. More info: does he want close to oe weights so no rebalanceing? More or less static CR? It'd have open chambered 906's (if unmolested) live every 24 hour block of time like it's your last day on earth

Re: advice [Re: RapidRobert] #845820 11/04/10 06:51 PM 11/04/10 06:51 PM
Joined: Feb 2005 Posts: 464 C cmansell OP mopar
cmansell OP mopar C Joined: Feb 2005 Posts: 464	Yes it's a basic oe budget rebuild. Car has a bout 140k miles on it.

Re: advice [Re: cmansell] #845821 11/05/10 01:11 AM 11/05/10 01:11 AM
Joined: Jan 2003 Posts: 75,028 U.S.S.A. JohnRR I Win
JohnRR I Win Joined: Jan 2003 Posts: 75,028 U.S.S.A.	There is no stock replacement piston for a 68 440 , the only choices are 2 smogger low compression pistons or a piston that would be a 6pk replacement , go with the 6pk replacement .

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1