Re: How to remove K-member bolts?
[Re: Fab64]
#83563
07/03/08 04:58 PM
07/03/08 04:58 PM
|
Joined: Dec 2003
Posts: 8,964 Pizza Bucket
snuggles
master
|
master
Joined: Dec 2003
Posts: 8,964
Pizza Bucket
|
make sure to use some penetrating oil.Seems like I remeber seeing holes in the area of the bolts or maybe drill some really small ones above the bolts to spray lube.
Last edited by wicked fish; 07/03/08 05:10 PM.
|
|
|
Re: How to remove K-member bolts?
[Re: snuggles]
#83567
07/03/08 05:32 PM
07/03/08 05:32 PM
|
Joined: Feb 2005
Posts: 28,312 Cincinnati, Ohio
Challenger 1
Too Many Posts
|
Too Many Posts
Joined: Feb 2005
Posts: 28,312
Cincinnati, Ohio
|
Quote:
make sure to use some penetrating oil.Seems like I remeber seeing holes in the area of the bolts or maybe drill some really small ones above the bolts to spray lube.
Very important, soak em good with oil FIRST. Inside and out, there are holes nearby where you can squirt oil in there.
|
|
|
Re: How to remove K-member bolts?
[Re: 68jim]
#83570
07/03/08 08:39 PM
07/03/08 08:39 PM
|
Joined: Nov 2003
Posts: 36,040 Lincoln Nebraska
RapidRobert
Circle Track
|
Circle Track
Joined: Nov 2003
Posts: 36,040
Lincoln Nebraska
|
I drilled (4) small holes & oiled them daily for (3)days as I read somewhere that a guy did that(sometimes I get anal about these things!) they came out smooth as butter. I shudder to think of what would have been in store for me if one would have broken off. So you gotta ask yourself do you feel lucky PS they have only been(probably) untouched for 30 years or so.
live every 24 hour block of time like it's your last day on earth
|
|
|
Re: How to remove K-member bolts?
[Re: BDW]
#83571
07/03/08 08:51 PM
07/03/08 08:51 PM
|
Joined: Jun 2006
Posts: 3,075 Eastern Ohio
mopowergtx
master
|
master
Joined: Jun 2006
Posts: 3,075
Eastern Ohio
|
Quote:
Go to home depot, get a 2-3' section of pipe to go over your breaker bar for leverage. Amazing how easy they turn.
My heavy duty 1/2' impact wouldnt budge some but they are no match for a breaker bar and 3 foot of "cheater" pipe.
|
|
|
Re: How to remove K-member bolts?
[Re: mopowergtx]
#83572
07/03/08 09:43 PM
07/03/08 09:43 PM
|
Joined: Jan 2003
Posts: 5,789 Hamilton, Ontario Canada
Magnum
master
|
master
Joined: Jan 2003
Posts: 5,789
Hamilton, Ontario Canada
|
The torque to undo the bolt should be the least of your worries. The nut spot welded inside the frame should be of concern.
69 Super Bee, 93 Mustang LX, 04 Allure Super
|
|
|
Re: How to remove K-member bolts?
[Re: Magnum]
#83573
07/03/08 10:13 PM
07/03/08 10:13 PM
|
Joined: Feb 2005
Posts: 28,312 Cincinnati, Ohio
Challenger 1
Too Many Posts
|
Too Many Posts
Joined: Feb 2005
Posts: 28,312
Cincinnati, Ohio
|
Quote:
The torque to undo the bolt should be the least of your worries. The nut spot welded inside the frame should be of concern.
That's what I was thinking.
|
|
|
Re: How to remove K-member bolts?
[Re: Magnum]
#83574
07/04/08 02:11 PM
07/04/08 02:11 PM
|
Joined: Jan 2003
Posts: 1,756 London, England
Gavin
top fuel
|
top fuel
Joined: Jan 2003
Posts: 1,756
London, England
|
Quote:
The nut spot welded inside the frame should be of concern.
What he said Do the soaking thing - I also soaked mine for several days or more, they came out fine. Better safe than sorry
|
|
|
Re: How to remove K-member bolts?
[Re: Fab64]
#83575
07/04/08 02:30 PM
07/04/08 02:30 PM
|
Joined: Feb 2007
Posts: 2,315 MOPAR HEADQUARTERS IN ALDEN NY
hemigod426
top fuel
|
top fuel
Joined: Feb 2007
Posts: 2,315
MOPAR HEADQUARTERS IN ALDEN NY
|
if you take out the rear bolt on your front bumber bracket. you will now have a open hole in the frame right over k-frame front bolts. oil can them with trans fluid and it will run down to other set. heat one at a time with hand held bottle torch, never impact, ive used my 3/4 inch rachet on over 50 rot boxes ive chopped up, to get the k-frame out never spun an insert yet.
MOPAR OR NO CAR
|
|
|
|
|