Re: BCR Products main caps
[Re: CRIKEY]
#796453
09/08/10 07:19 PM
09/08/10 07:19 PM
|
Joined: Jan 2003
Posts: 10,044 MN
JERICOGTX
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 10,044
MN
|
I would still contact BCR and see if he has any or possibly can still make them. IMO he had the best caps on the market. Jeff
69 GTX
68 Road Runner
|
|
|
Re: BCR Products main caps
[Re: 1_WILD_RT]
#796455
09/08/10 07:35 PM
09/08/10 07:35 PM
|
Joined: Nov 2004
Posts: 3,544 Syracuse,NY
CompWedgeEngines
master
|
master
Joined: Nov 2004
Posts: 3,544
Syracuse,NY
|
There is a Moparts member that is looking at continuing the line that BCR has, but I dont know if anything further has been finalized. Its a fairly sizeable undertaking, so it could be some time. Dont want to speak for these guys, but I know there have been some negotiations, or at least consideration.
RIP Monte Smith
Your work is a reflection of yourself, autograph it with quality.
WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
|
|
|
Re: BCR Products main caps
[Re: CRIKEY]
#796457
09/08/10 09:26 PM
09/08/10 09:26 PM
|
Joined: Jan 2003
Posts: 2,697 Renton Wa
topfueldart
master
|
master
Joined: Jan 2003
Posts: 2,697
Renton Wa
|
Best Machine in Michigan was selling aluminum caps like those for quite a while, I bought a set and know 440 Jim runs them too.
11.48 @ 120 with a 1.80 60' 318, stock 1.88 heads, stock 904, Pump Gas, 13 lbs of boost.
9.94 @ 134, 318 on pump gas, 14 lbs w/ Eddies, transbrake 727, 3600 lbs, 3.54 gear and 28's.
|
|
|
Re: BCR Products main caps
[Re: CRIKEY]
#796458
09/08/10 09:32 PM
09/08/10 09:32 PM
|
Joined: Jan 2003
Posts: 16,930 NC
440Jim
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 16,930
NC
|
Quote:
Chuck@BM doesnt have any.....can anyone point me in the right direction
I have been running the BEST Machine aluminum main caps on my 400 block, 511 CID since 2006. I liked them so much, I put a set on my old (now a back-up) short block a couple years ago. I hope they make another batch to sell.
|
|
|
|
|