Header recommendation for 340 Challenger & mini starter - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Header recommendation for 340 Challenger & mini starter

Print Thread

Header recommendation for 340 Challenger & mini starter #727163 06/17/10 11:01 PM 06/17/10 11:01 PM
Joined: Jan 2003 Posts: 1,046 Colorado Springs T/A CARe OP super stock
T/A CARe OP super stock Joined: Jan 2003 Posts: 1,046 Colorado Springs	Hey folks, Just got a mini-starter and my current headers touch the solenoid to gear housing wire attachment point. Car has power steering, automatic, no air. Any tried and true recommendations? Thanks!

Re: Header recommendation for 340 Challenger & mini starter [Re: T/A CARe] #727164 06/18/10 11:19 AM 06/18/10 11:19 AM
Joined: Jan 2003 Posts: 1,481 Outside thedriver pro stock
thedriver pro stock Joined: Jan 2003 Posts: 1,481 Outside	i use hedmans and have no issues. same setup. 1973 challenger Dana. 4 speed. Low deck.

Re: Header recommendation for 340 Challenger & mini starter [Re: T/A CARe] #727165 06/18/10 02:00 PM 06/18/10 02:00 PM
Joined: Mar 2006 Posts: 117 CT R RedRT member
RedRT member R Joined: Mar 2006 Posts: 117 CT	Same setup. Hedmans. Make sure to get them coated. Coating looks great, and the heat thrown off them is considerably less than uncoated headers. Geoff 1970 Challenger 340

Re: Header recommendation for 340 Challenger & mini starter [Re: RedRT] #727166 06/18/10 02:15 PM 06/18/10 02:15 PM
Joined: Nov 2005 Posts: 95 Utica, Mich R Rlazer member
Rlazer member R Joined: Nov 2005 Posts: 95 Utica, Mich	The TTI headers fit but I am not happy with them for another reason. In short, the opening at the header cannot be opened up at all to make room for larger Edelbrock heads. Just my luck, I heard TTi now as corrected that. I wonder if they'll swap mine out?

Re: Header recommendation for 340 Challenger & mini starter [Re: Rlazer] #727167 06/18/10 02:24 PM 06/18/10 02:24 PM
Joined: Jan 2004 Posts: 2,190 SW MO closer9 top fuel
closer9 top fuel Joined: Jan 2004 Posts: 2,190 SW MO	Quote: The TTI headers fit but I am not happy with them for another reason. In short, the opening at the header cannot be opened up at all to make room for larger Edelbrock heads. Just my luck, I heard TTi now as corrected that. I wonder if they'll swap mine out? hmmmm... if they'd fit a '67 B-body... Daily: '19 Frontier 4WD Belle: '67 Belvedere Convertible, 318/727 in Go ManGo! Other: '64 C10, 283/3 on the tree

Re: Header recommendation for 340 Challenger & mini starter [Re: closer9] #727168 06/18/10 05:28 PM 06/18/10 05:28 PM
Joined: Jan 2003 Posts: 1,009 Richmond Twp. Mi. Mr340 super stock
Mr340 super stock Joined: Jan 2003 Posts: 1,009 Richmond Twp. Mi.	Hooker Super Comps here.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1