Re: Good quality reusable v/c gaskets
[Re: go green]
#695483
05/12/10 12:32 AM
05/12/10 12:32 AM
|
Joined: Dec 2007
Posts: 10,542 BROOK PARK, OH
WILD BILL
Senior Member of the Junior Dragster Club
|
Senior Member of the Junior Dragster Club
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
|
Superformance
Roadhazard makes them and they are great.
|
|
|
Re: Good quality reusable v/c gaskets
[Re: 512 VALIANT]
#695485
05/12/10 01:06 PM
05/12/10 01:06 PM
|
Joined: Apr 2006
Posts: 3,675 Akron, Ohio U.S.A.
roadhazard
master
|
master
Joined: Apr 2006
Posts: 3,675
Akron, Ohio U.S.A.
|
Quote:
Who makes them?? I have felpro pn# 1610 and are ok only they tear after a bit any suggestions? I'm sure it's been discussed before. Thx
What style valve covers and cylinder head are you using? This will make a difference in material selection.
Here's a shot of my gaskets for heads with a machined gasket rail and cast or fabricated covers.
|
|
|
Re: Good quality reusable v/c gaskets
[Re: 493_DART]
#695489
05/12/10 07:49 PM
05/12/10 07:49 PM
|
Joined: Feb 2009
Posts: 1,274 Ontario.Canada
can.al
pro stock
|
pro stock
Joined: Feb 2009
Posts: 1,274
Ontario.Canada
|
RTV valve cover. tighten lightly to barely roll the cork over the rail on the head. it won't run up ,and at $10 keep a few spares!
|
|
|
Re: Good quality reusable v/c gaskets
[Re: Labratt]
#695491
05/12/10 11:33 PM
05/12/10 11:33 PM
|
Joined: Dec 2008
Posts: 136 CHANDLER, AZ
512 VALIANT
OP
member
|
OP
member
Joined: Dec 2008
Posts: 136
CHANDLER, AZ
|
Thx for the info - sorry for delay. I was in a training class ALL DAY!! - By the way they are Victor Eddy heads. -- Sheet metal v/c's.
Last edited by 512 VALIANT; 05/12/10 11:35 PM.
|
|
|
Re: Good quality reusable v/c gaskets
[Re: 512 VALIANT]
#695492
05/12/10 11:43 PM
05/12/10 11:43 PM
|
Joined: Apr 2006
Posts: 3,675 Akron, Ohio U.S.A.
roadhazard
master
|
master
Joined: Apr 2006
Posts: 3,675
Akron, Ohio U.S.A.
|
Quote:
Thx for the info - sorry for delay. I was in a training class ALL DAY!! - By the way they are Victor Eddy heads. -- Sheet metal v/c's.
Training all day My gaskets will work with your combination of parts. If you would like to give them a go, send me a PM and I can refer you to a distributor
|
|
|
Re: Good quality reusable v/c gaskets
[Re: roadhazard]
#695493
05/12/10 11:54 PM
05/12/10 11:54 PM
|
Joined: Dec 2008
Posts: 136 CHANDLER, AZ
512 VALIANT
OP
member
|
OP
member
Joined: Dec 2008
Posts: 136
CHANDLER, AZ
|
Quote:
Quote:
Thx for the info - sorry for delay. I was in a training class ALL DAY!! - By the way they are Victor Eddy heads. -- Sheet metal v/c's.
Training all day My gaskets will work with your combination of parts. If you would like to give them a go, send me a PM and I can refer you to a distributor
Thx will send PM -- need something reliable!
|
|
|
|
|