anybody use 1 of this and how was the workman ship of the hood looking at the 6pack for the duster..thanks

MAS has gone the way of the brontosaurus.
They were local.
C&A performance bought their inventory and they do have someone doing the glass for them on a limited basis.
I can't speak to the quality , but if they still have an active phone # , I would make sure it is in stock if you want it in any kind of hurry.
It took two weeks to tell me that they could not do a hood for my '65.

thanks for the good info ..who has a good glass hood with a good price...i know that most all will need some work but just dont want to have to redo it comp...also thinking of bumpers and deck lid.....

For a race car, that you don't care how it looks, their stuff is probably ok. Otherwise, look elsewhere...

i had an mas glass hood on my dart, it fit ok, looked pretty good.

been looking for a glass hood for my road runner, couple of the guys over at the road runner nest are using a hood from these guys: http://usbodysource.com/ finished product looked good in the pics i saw, the guys didnt have any complaints...

had one since 1995, fit is ok , but could a little better. try checking out AAR. fit is really nice from what i've seen. you get what you pay for.

I had a 6-pak 69 road runner hood from MAS. It looked ok on top. The bottom wasn't made like the factory with the box to seal the carbs to. On the street you couldn't tell the difference. At 80MPH on the track...the front corners of the hood curled up 90 degrees. That's a little scarey. At 120MPH I could see the carbs from the bow in the back of the hood. If you're racing don't go MAS.

one more pic

last one. I'm very satisfied with mine.

MAS hood here too. Had a bit of work to do to get it nice but it's a tough old piece. Also had the scoop lifted too. Pic is an arty one but shows it OK.