|
speedo pinion?
#681305
04/26/10 09:54 PM
04/26/10 09:54 PM
|
Joined: Nov 2004
Posts: 2,234 BFE
vancamp
OP
super street
|
OP
super street
Joined: Nov 2004
Posts: 2,234
BFE
|
am i right if you have 275/60/15 tires and 3.23 gears you would need a green 31 tooth speedo pinion gear correct?
VanCamp Dent Systems
Paintless Dent Repair/
Mopar Restification
|
|
|
Re: speedo pinion?
[Re: vancamp]
#681306
04/26/10 10:31 PM
04/26/10 10:31 PM
|
Joined: Jan 2003
Posts: 3,905 Minnesota
3twos
master
|
master
Joined: Jan 2003
Posts: 3,905
Minnesota
|
How tall are the tires? You may need the 33 tooth
Al & Sheila
|
|
|
Re: speedo pinion?
[Re: vancamp]
#681308
04/27/10 12:19 AM
04/27/10 12:19 AM
|
Joined: Nov 2003
Posts: 36,040 Lincoln Nebraska
RapidRobert
Circle Track
|
Circle Track
Joined: Nov 2003
Posts: 36,040
Lincoln Nebraska
|
I'd make a mark on the tire next to the pavement then measure the rollout on the pavement which'd be ~8-9 ft or so (not sure on the rest of the formula) to get an accurate figure as you dont want to have to pull it again.
live every 24 hour block of time like it's your last day on earth
|
|
|
Re: speedo pinion?
[Re: Ronnman]
#681314
04/27/10 10:36 PM
04/27/10 10:36 PM
|
Joined: Nov 2004
Posts: 2,234 BFE
vancamp
OP
super street
|
OP
super street
Joined: Nov 2004
Posts: 2,234
BFE
|
Quote:
The 30 tooth gear would be closer. See below Ron
I used the chart on here and it comes up with a 2838391 which is a 31, what would the speedo difference be between the 31 and 30? reason iask i have a 26,27 a 31 is on the way but dont have a 30.
Last edited by vancamp; 04/27/10 10:38 PM.
VanCamp Dent Systems
Paintless Dent Repair/
Mopar Restification
|
|
|
Re: speedo pinion?
[Re: vancamp]
#681316
04/28/10 06:47 PM
04/28/10 06:47 PM
|
Joined: Jan 2003
Posts: 25,785 Rio Linda, CA
John_Kunkel
Too Many Posts
|
Too Many Posts
Joined: Jan 2003
Posts: 25,785
Rio Linda, CA
|
The actual math says you need a 30.25 tooth pinion, 30 is the closest.
The INTERNET, the MISinformation superhighway
|
|
|
|
|
|