flipping front hanger on a body? - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer flipping front hanger on a body?

Print Thread

flipping front hanger on a body? #675351 04/20/10 06:12 AM 04/20/10 06:12 AM
Joined: Feb 2004 Posts: 1,012 indiana M mcmopars OP super stock
mcmopars OP super stock M Joined: Feb 2004 Posts: 1,012 indiana	want to lower the rear on the duster a bit as ss springs jack her up a bit more than i like.will the front hanger bolt in after being inverted?or will it need to modified?and any idea how much it will lower it?1-1 1/2 " and anything else i should be aware of besides pinion angle

Re: flipping front hanger on a body? [Re: mcmopars] #675352 04/20/10 10:17 AM 04/20/10 10:17 AM
Joined: Nov 2003 Posts: 36,041 Lincoln Nebraska R RapidRobert Circle Track
RapidRobert Circle Track R Joined: Nov 2003 Posts: 36,041 Lincoln Nebraska	insert the bolt from the outside and you'll be good. Not sure on the amt of gain. EDIT w more thought I dont think you'll net 1&1/2" Last edited by RapidRobert; 04/20/10 10:21 AM. live every 24 hour block of time like it's your last day on earth

Re: flipping front hanger on a body? [Re: mcmopars] #675353 04/20/10 10:39 AM 04/20/10 10:39 AM
Joined: Jan 2003 Posts: 31,060 Oregon A AndyF I Win
AndyF I Win A Joined: Jan 2003 Posts: 31,060 Oregon	The bolt pattern is different from top to bottom so you can't just flip the hangers over. Buy new hangers from Mancini Racing or Firm Feel. The new hangers come with a second eye bolt location.

Re: flipping front hanger on a body? [Re: AndyF] #675354 04/20/10 05:09 PM 04/20/10 05:09 PM
Joined: Feb 2004 Posts: 1,012 indiana M mcmopars OP super stock
mcmopars OP super stock M Joined: Feb 2004 Posts: 1,012 indiana	Quote: The bolt pattern is different from top to bottom so you can't just flip the hangers over. Buy new hangers from Mancini Racing or Firm Feel. The new hangers come with a second eye bolt location. any idea of what i would gain?

Re: flipping front hanger on a body? [Re: mcmopars] #675355 04/20/10 05:11 PM 04/20/10 05:11 PM
Joined: Feb 2004 Posts: 1,012 indiana M mcmopars OP super stock
mcmopars OP super stock M Joined: Feb 2004 Posts: 1,012 indiana	just looked at firm feel,lowers 1 ".thanks

Re: flipping front hanger on a body? [Re: mcmopars] #675356 04/20/10 06:12 PM 04/20/10 06:12 PM
Joined: Oct 2005 Posts: 4,956 WI Dcuda69 master
Dcuda69 master Joined: Oct 2005 Posts: 4,956 WI	Flip the hangers.....a little die grinder makers quick work of the bolt hole issue. Dropped mine all of an inch Be prepared to check/change pinion angle!Mine have been flipped for years with no problems!

Re: flipping front hanger on a body? [Re: Dcuda69] #675357 04/20/10 08:10 PM 04/20/10 08:10 PM
Joined: Nov 2004 Posts: 6,653 Near Reading PA USA pinkduster master
pinkduster master Joined: Nov 2004 Posts: 6,653 Near Reading PA USA	Dropped my car more than one inch as you can see in this picture I put together. The top two are obviously before I flipped the front mounts.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1