what is the correct fan blade for a 64 sport fury???? - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer what is the correct fan blade for a 64 sport fury????

Print Thread

what is the correct fan blade for a 64 sport fury???? #671083 04/15/10 09:45 PM 04/15/10 09:45 PM
Joined: Jan 2008 Posts: 33 Michigan B bigblockSfury OP member
bigblockSfury OP member B Joined: Jan 2008 Posts: 33 Michigan	What should the stock fan blade for a 64 sport fury look like? Right now it has a 17.5 in. dia. fixed four blade fan. The car will overheat if I let it set long enough at idle. I hope no one tells me what I have is correct. The car was a 383 and someone put a 440 in it. The car does not have a fan shroud. I really wanted to switch to a clutch fan from a later model to gain back some power however I do not have enough room between the water pump and the radiator. I know there are a lot of opinions on here so if you have a fan you like that would work for my application let me know.

Re: what is the correct fan blade for a 64 sport fury???? [Re: bigblockSfury] #671084 04/15/10 10:52 PM 04/15/10 10:52 PM
Joined: Jan 2003 Posts: 32,930 Grand Prairie,Texas stumpy I Win
stumpy I Win Joined: Jan 2003 Posts: 32,930 Grand Prairie,Texas	Changing fans won't do any good until you get a shroud on the radiator.

Re: what is the correct fan blade for a 64 sport fury???? [Re: bigblockSfury] #671085 04/15/10 11:30 PM 04/15/10 11:30 PM
Joined: Dec 2005 Posts: 4,231 State of retirement 5 52savoy master
52savoy master 5 Joined: Dec 2005 Posts: 4,231 State of retirement	Sounds like they kept the same small radiator after going to a 440. I would switch to an aluminum rad.. http://motors.shop.ebay.com/__?_from=R40...tor&_sacat=

Re: what is the correct fan blade for a 64 sport fury???? [Re: bigblockSfury] #671086 04/16/10 01:01 AM 04/16/10 01:01 AM
Joined: Jul 2003 Posts: 1,107 Spring Valley ,Ca. moparsquid super stock
moparsquid super stock Joined: Jul 2003 Posts: 1,107 Spring Valley ,Ca.	I have a 4 blade in my 62 dart 500 stroker and a 4-core rad I dont seem to have any problems.

Re: what is the correct fan blade for a 64 sport fury???? [Re: moparsquid] #671087 04/16/10 07:07 AM 04/16/10 07:07 AM
Joined: Jan 2008 Posts: 33 Michigan B bigblockSfury OP member
bigblockSfury OP member B Joined: Jan 2008 Posts: 33 Michigan	Quote: I have a 4 blade in my 62 dart 500 stroker and a 4-core rad I dont seem to have any problems. Where did you get your rad? Thanks for the information guys! I knew a shroud was a good idea; i just dont want to spend a couple hundred dollars to get one. Although it may be cheaper than a new rad depending on what kind I pick.

Re: what is the correct fan blade for a 64 sport fury???? [Re: bigblockSfury] #671088 04/16/10 08:08 AM 04/16/10 08:08 AM
Joined: Nov 2003 Posts: 1,033 Madison, Wisconsin chrisnben super stock
chrisnben super stock Joined: Nov 2003 Posts: 1,033 Madison, Wisconsin	hey Fury, I have a 7-blade 18" fan I am not using. Pick up a shroud for $100- maybe less and this combo will work great. PM if you want it. '70 Cuda "Badfish 2"- in the works Home of MoPar University- We school 'em one at a time!!

Re: what is the correct fan blade for a 64 sport fury???? [Re: bigblockSfury] #671089 04/16/10 08:58 PM 04/16/10 08:58 PM
Joined: Oct 2007 Posts: 480 templeton,ma C coro500net mopar
coro500net mopar C Joined: Oct 2007 Posts: 480 templeton,ma	The 4 blade should be correct,my 65 coronet with a 361 had that fan,and yes it did run hot.

Re: what is the correct fan blade for a 64 sport fury???? [Re: coro500net] #671090 04/17/10 03:14 PM 04/17/10 03:14 PM
Joined: Feb 2004 Posts: 7,196 Harrisburg, Pa. screamindriver master
screamindriver master Joined: Feb 2004 Posts: 7,196 Harrisburg, Pa.	There is a repop metal shroud available for the 64 fury....Mancini carries one but I'm not sure on the real source...An original 64 Max Wedge car had a clutch fan but it was shorter than anything available over the counter now...There was also a 65 clutch fan available that was very short but I can't remember the application...The parts store jaguar fan clutch that everyone is using {for tight clearance} might fit in there depending on how much room you actually have between there... I have an old style 7 blade fixed I use occasionally for parade duty but it sounds like an airplane prop when you wind up the engine...

Re: what is the correct fan blade for a 64 sport fury???? [Re: screamindriver] #671091 04/19/10 12:53 PM 04/19/10 12:53 PM
Joined: Jan 2008 Posts: 33 Michigan B bigblockSfury OP member
bigblockSfury OP member B Joined: Jan 2008 Posts: 33 Michigan	Quote: There is a repop metal shroud available for the 64 fury....Mancini carries one but I'm not sure on the real source...An original 64 Max Wedge car had a clutch fan but it was shorter than anything available over the counter now...There was also a 65 clutch fan available that was very short but I can't remember the application...The parts store jaguar fan clutch that everyone is using {for tight clearance} might fit in there depending on how much room you actually have between there... I have an old style 7 blade fixed I use occasionally for parade duty but it sounds like an airplane prop when you wind up the engine... I have been trying to convince myself to buy mancini's re pop shroud. They are proud of it$$$$ I will check into the jaguar fan clutch. Thanks for all of the information everyone.

Re: what is the correct fan blade for a 64 sport fury???? [Re: bigblockSfury] #671092 04/19/10 01:04 PM 04/19/10 01:04 PM
Joined: Dec 2007 Posts: 7,759 So Cal HealthServices Why would you even post that?
HealthServices Why would you even post that? Joined: Dec 2007 Posts: 7,759 So Cal	My bud's 64 has no fan shroud and has a hard time getting up to 180. He does have a clutch fan. 5934832-aIMG_4903.jpg (60 downloads) Allen Here's a novel idea, let's not throw a bunch of parts at the car hoping it will fix the problem and instead spend a little time diagnosing it first. Life was a little easier when I was just a wrench.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1