Need some pix of the rear sway bar setup in 71 - 74 B bodies. Found a rear with the bar still attached but its not in the car. Any help would be greatly appreciated........

From the '72 parts manual -

Thanks Charger but I was kindof hoping for some closeup pix.....From what I see in your pic the bar has dip in it where it goes past the pumpkin....The one I found, I blieve is straight??? Might be for a C body car.....Is the mounting hardware the same or ??? Anyone have some closeup pix???

This is the hard-to-find '72 bar with the bends to clear the Dana 9.75" beast...

The straight bar was used on the smaller ones.

mines looks right in the middle of both... I can't find the pic right now

found it

my rear sway bar rear view

got it NOS and PN was according with my 74 parts catalog

Thanks for the PIX guys...... Now would it be possible to get some demensions...PLEASE!! If it turns out to be a C body bar...Should I grab it anyway or at least get the brackets....Will any of it work on a B body? Thanks Again!!

I can't say whether a C-body setup would work on a B-body but I'd guess the brackets are probably all the same. In any case, here's the width of the bar Nacho has, 44".

The shaft links for the B-bodies look like this-

I put a straight one on my '72 this Winter. It came from a '73. It is really close to the front of the case on my 8 1/4". Even though the rear end in my car is small I'd still like to have a little more clearance with the curved one. I dont' think I can add anything that hasn't already been posted but if I can help let me know.