|
Re: Indy Hemi intake?
[Re: 604 Hemi GTX]
#640600
03/15/10 10:50 AM
03/15/10 10:50 AM
|
Joined: Mar 2006
Posts: 2,675 Mt. Eden Ky.
Hemi Allstate
master
|
master
Joined: Mar 2006
Posts: 2,675
Mt. Eden Ky.
|
The carb mounting flange appears to be 2.5 to 3" above the runners on the -4. It is 2.25" taller than the -3. The -3 appears to have a more average carb flange height of about an inch or so.
1996 Ram 1500 Sport 1968 road runner 1952 Sears Allstate licensed, pump gas, Hemi 5.98 @ 115.73 1.33 60 ft. The best is yet to come. Painless Performance / Street RODDER magazine Top 100 for 2019
|
|
|
Re: Indy Hemi intake?
[Re: Hemi Allstate]
#640601
03/15/10 12:19 PM
03/15/10 12:19 PM
|
Joined: Mar 2005
Posts: 2,644 North Carolina
sasquatch
master
|
master
Joined: Mar 2005
Posts: 2,644
North Carolina
|
On a flat surface to the flange the -3 is 7 inches tall. The -4 is 9.25 inches tall to the carb flange. Hope that helps. Todd
|
|
|
Re: Indy Hemi intake?
[Re: 604 Hemi GTX]
#640604
03/15/10 03:10 PM
03/15/10 03:10 PM
|
Joined: Mar 2006
Posts: 2,675 Mt. Eden Ky.
Hemi Allstate
master
|
master
Joined: Mar 2006
Posts: 2,675
Mt. Eden Ky.
|
Indy says from end rails of block to top of carb flange of manifold 9.25" for the 426-4 and 7" for the 426-3. I hope this helps. Mark
1996 Ram 1500 Sport 1968 road runner 1952 Sears Allstate licensed, pump gas, Hemi 5.98 @ 115.73 1.33 60 ft. The best is yet to come. Painless Performance / Street RODDER magazine Top 100 for 2019
|
|
|
|
|
|