I guess 5 points is all NHRA requires to 10.00. Does anyone have this setup with pictures?

I've got a mid-eleven second street car that I bracket race 6 times a year. I like the idea of making it easier for the wife and kids to get into the factory a-bodies bench seats with the 5 point.

Anyone use this setup?

Here is pics of my Valiant that I have posted a bunch of times. But here goes.......Keep in mind that a couple show a piece of angle iron that was temporary brace and looks like a Passenger door bar, but was removed.

Ron.

2

3

4

5

6

If acess is the only concern you could always use swing out door bars.

I ran this set up. I had a swing out bar on the drivers side that rode on a stub in the floor. It took seconds to remove, very conveniant.

I guess there is no benefit of a 6th point if you don't have a passenger huh?

Same rules for verts? Door bar on pass side only OK?

Thanks for the pics guys.

Hey Ron do you run a back seat? Do you have a finished interior pic? Your car is sweet.. is it up and running?

Jeff

Yes, my car is finished and I am SLOWLY building a new Bullet to go faster. The 501 CI small block.
Yes I have a full interior.

This one shows the seat brace. Same on both sides.

looks super clean

thanks Ron

Awesome write up.

Here's a pic of my '70 Swinger. It's an original 340 car but now has a mild, pump gas 408". The car has the original bench seats, auto on column, factory hood scoops. The car has gone 11.50 at 115.